Husqvarna DXR-310 manual Service schedule, Daily inspection

Page 37

MAINTENANCE AND SERVICE

Service schedule

The service schedule is based on the machine’s operating time. More frequent service intervals might be necessary when working in dusty or hot environments and in conjunction with work that generates high temperatures.

A description of how the operations are to be performed is to be found in the service review.

Daily inspection

Daily maintenance must also be carried out after transportation.

Lubrication

Cylinders and shafts in arm system and tool attachment

Tools

Cracks

Cylinders and shafts in lower part and outriggers

Cylinders and shafts in arm systems and tool attachment

Tools

Mountings

Cylinders and shafts in lower part and outriggers

Cylinders and shafts in arm system and tool attachment

Tool

Level check

Hydraulic ßuid

Hammer lubrication

Wear and damage

Cylinders and shafts in arm system and tool attachment

Visible hoses (arm system, outriggers etc)

Power cable, connectors and sockets

Leakage

Cylinders and shafts in lower part and outriggers

Cylinders and shafts in arm system and tool attachment

Visible hoses (arm system, outriggers etc)

Tool

Function

Cylinders and shafts in lower part and outriggers

Cylinders and shafts in arm system and tool attachment

Power cable, connectors and sockets

Tool

English - 37

Image 37

Contents

DXR-310 Page Contents Introduction Symbols on the machine KEY to SymbolsProtective equipment Safety InstructionsPersonal protective equipment Other protective equipmentManagement and operator General safety instructionsIf there is an accident ResponsibilityElectrical safety Work area safetyGeneral working instructions Machine’s risk areaOperation Personal safetyGeneral Education and trainingGeneral ManoeuvringOutriggers Rotation functionFalling material Towing Transport and storageMaintenance and service Machine’s safety featuresPersonal protection Mechanical protection External environmental factors TemperatureMoisture Dust and particlesMachine’s functions PresentationWhat is what in the machine General Hydraulic SystemMain pressure Pressure cut-offMachine’s hydraulic system High-voltage circuit Electric SystemLow-voltage circuit Machine’s electric system Battery Remote controlControl System Machine’s softwareWhat is what on the remote control Symbols on the remote control Before starting Starting and StoppingStarting StoppingOperation Key to commandsOperating modes Designation of the machine’s partsWork mode Track operation Set-up modeTransport mode Bucket ToolsHydraulic hammer Concrete cutterChanging tools CleaningFitting StorageTrack widener SettingsFitting the track widener Menu system LCD Adjustment Operational settingsTuning Software versionMaintenance and Service Cleaning method CleaningCleaning of components After washingDaily inspection Service scheduleMiscellaneous Weekly serviceAfter the Þrst 100 hours Hours serviceChange Lubrication Service reviewOutriggers and arm system Gear ringShafts MountingsTightening torque PosWear and damage Level checkCracks LeakageFunctional inspection Draining hydraulic ßuid ChangeReplenishing hydraulic ßuid Air Þlter Oil ÞlterError messages Trouble ShootingService messages Service messages and actions ActionFault Cause Possible action Trouble shooting guideEnglish Guide values for mains connection Technical DataHydraulic system’s pressure 50 HzHydraulic ßuid and lubricant Preset limit valuesHydraulic ßuid LubricantTechnical data Noise emissions Sound power levelMachine without tool Machine with tool hydraulic hammerEnglish Technical Data EC-declaration of conformity EC-DECLARATION of ConformityPage ´z+SXh¶6Q¨ Page 1151567-26 2009-03-16