Specific Safety Rules, Personal Safety, Service

6950.book Seite 6 Montag, 29. November 2004 12:54 12

ENG ENGLISH

3.4Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

3.5Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

3.6When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W". These cords are rated for outdoor use and reduce the risk of electric shock.

4 Personal Safety

4.1Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating power tools may result in serious personal injury.

4.2Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

4.3Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

4.4Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

4.5Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.

4.6Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat or hearing protection must be used for appropriate conditions.

5. Tool Use and Care

5.1Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

5.2Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

5.3Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

5.4Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive

safety measures reduce the risk of starting the tool accidentally.

5.5Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

5.6Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

5.7Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

5.8Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

6 SERVICE

6.1Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

6.2When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unau-thorized parts or failure to follow Maintenance instructions may create a risk of electric shock or injury.

3 Specific Safety Rules

Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.

Contact with a "Iive" wire will also make exposed metal parts of the tool "live" and shock the operator.

Before using this power tool, completely read and understand the enclosed safety information and the instructions. Keep all enclosed documentation for future reference, and pass on your power tool only together with this documentation.

For your own protection and the protection of your power tool, observe the passages marked by this symbol!

Wear sturdy work shoes!

Take care to avoid gas, electricity, and water supplies!

600224420 specifications

The Metabo 600224420, a powerful and versatile tool, is an essential addition to any professional or DIY enthusiast's arsenal. Known for its advanced technologies and superior performance, this tool is designed to meet the demanding requirements of various applications, from construction to woodworking and metalworking.

One of the standout features of the Metabo 600224420 is its robust motor, which delivers exceptional power output. This high-performance motor ensures that users can tackle even the toughest tasks with ease. Coupled with a durable design, this tool is built to withstand the rigors of daily use while maintaining consistent performance.

The Metabo 600224420 also incorporates cutting-edge technologies to enhance user experience. One notable feature is its innovative vibration dampening system. This technology minimizes vibrations during operation, providing greater comfort and reducing fatigue during extended periods of use. This is particularly beneficial for professionals who rely on precision and accuracy in their work.

Another key characteristic of the Metabo 600224420 is its user-friendly controls and ergonomic design. The tool is designed with the operator in mind, ensuring that it feels balanced and comfortable in hand. The intuitive controls allow for easy adjustment and access to various settings, making it suitable for users of all levels of experience.

Additionally, the Metabo 600224420 is equipped with advanced safety features. The anti-restart function prevents accidental startups, while the integrated overload protection helps safeguard against potential motor damage. These safety measures provide peace of mind, allowing users to focus on their work without unnecessary distractions.

The versatility of the Metabo 600224420 is further enhanced by its compatibility with a wide range of accessories. These accessories can be easily swapped out, allowing users to customize the tool for specific tasks, whether it be drilling, grinding, or cutting.

In conclusion, the Metabo 600224420 stands out as a premier tool, offering a blend of power, comfort, and safety. Its advanced features and thoughtful design make it a reliable choice for both professional tradespeople and home users alike. Investing in the Metabo 600224420 means equipping yourself with a tool that delivers performance and durability, ensuring that you can take on any project with confidence.