Bosch Power Tools 275T6, 285T6, 395T6 Grout Removal Kit, To set cutting depth Cleaning Grout

Page 15

DM 2610925474 10-04 10/19/04 3:40 PM Page 15

Grout Removal Kit 568

The #568 grout removal attachment comes completely assembled and ready to use. Use the #569 (1/16") bit for tiles spaced more than 1/16" apart. If your tiles are spaced more than 1/8" apart, it is recommended that you use the #570 (1/8") bit.

Note: If the bit is too wide for the spacing between your tiles, you may damage your tile or the grout removal bit.

Step 1: Remove the housing cap from the tool.

Step 2: Insert the grout removal bit into your rotary tool.

!When inserting the #569 or #570 CAUTION grout removal bit into your

Dremel rotary tool, be sure that the bit is secure within the “jaws” of the collet. Use the wrench to tighten the collet nut to prevent the bit from loosening within the collet. Do not use your Dremel Chuck, #4486, with the grout removal bits.

Step 3: Screw the grout removal attachment onto the rotary tool.

Step 4: Adjust the attachment and bit to the desired cutting depth.

Grout Removal Attachment Cutting Depth Adjustment

The Multi Slide Depth Adjustment has increment markings of 1/8" (3,2 mm). These markings are for reference only in identifying the depth of your desired cut. The multiple channels of the depth adjustment let you choose the orientation of the attachment to the tool. Be sure to securely tighten the screw within one of the multiple channel positions.

To set cutting depth:

Cleaning Grout:

Do not remove grout more than 1/8" below the face surface of the tile. Adjust the Multi Slide Depth Adjustment and bit so that no more than 1/8" of the bit extends beyond the base of the attachment.

1/8" 3,2mm

After removing 1/8" of grout, regrout to tile level. Seal the new grout.

Step 1

Step 2

Step 3

Step 4

Removing Grout to Replace A Broken Tile:

Remove all of the grout surrounding the broken tile. Adjust the Multi Slide Depth Adjustment so that no more than 1/8" of the bit extends beyond the base of the attachment. See Figure 5. Remove grout at a depth no more than 1/8" at a time. You may need to adjust the Multi Slide Depth Adjustment by 1/8" increments (reference the 1/8" incremental white markings on the Multi Slide Depth Adjustment) and make several passes until all the grout is removed.

When removing grout deeper into the grout line, you may strike hidden objects like screw heads, mortar, tile cement or nails that may cause the bit to bind, overheat or break. Reduce the tool speed and work through it slowly, making several passes. In case of screws or nails, remove the grout around the area as the bit will not cut through them.

Page 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Models 275T6 F013027503 285T6 F013028503 395T6 F013039504 MultiProWork Area Power Tool Safety RulesElectrical Safety Personal SafetyService Safety Rules for Rotary ToolsSanding, sawing, grinding Some dust created by powerSymbols Functional Description and Specifications Rotary Tool 275T6 & 285T6Rotary Tool 395T6 Flex-Shaft Cutting GuideRight Angle Attachment Dremel Keyless Chuck AssemblyCollet Identification Chart Rotary Tool is runningOperating Instructions Sharpen ToolsShape Wood Carve Wood Deburr Metal Questions or Problems?Call Using the Rotary ToolFlow and causes the motor to overheat Speed Range Switch SettingOperating Speeds Needs for Slower SpeedsKickback Assembly & Operation of AttachmentsInstallation Instructions Let speed do the workDisengagement of the Flex-Shaft Collet and Accessory AssemblyCollet Removal and Replacement Step Operating InstructionsNot for USE on Floor Tile DescriptionFor use in drywall For use on wall tile, cement board and plasterRemoving Grout to Replace a Broken Tile Grout Removal Attachment Cutting Depth AdjustmentTo set cutting depth Cleaning Grout Grout Removal KitOperating Instructions Prolong usage Right Angle AttachmentExtension Cords Maintenance InformationCleaning Curved END of Brush Must Match Curvature Housing SpringDremel Attachments Dremel Accessories Bristle Brushes Wire BrushesPolishing Accessories Sanding AccessoriesSpiral Cutting Bit Cutting WheelsDrywall Cutting Bit Tile Cutting BitDM 2610925474 10-04 10/19/04 340 PM Use only Dremel Tested, High Performance Accessories Depending on cutting direction relative to grainSpeed for light cuts, caution burning on deep grooves Speed Settings Drill BIT Modèles 275T6 F013027503 285T6 F013028503 395T6 F013039504 MultiPro Outil Rotatif Manuel de l’utilisateurConservez CES Instructions Règles de Sécurité GénéralesRéparation Consignes de sécurité pour outils rotatifsQue ponçage, sciage Consignes de sécurité pour outils rotatifs suiteNOM SymbolesDescription fonctionnelle et spécifications Outil Rotatif 275T6, 285T6Outil Rotatif 395T6 Universel de coupe Accessoire à angle droitArbre flexible 565 NécessaireAssemblage Mandrin Sans CLÉMandrin Sans CLÉ Dremel Affûtage des outils Consignes d’utilisationConsignes d’utilisation suite Questions ou problèmes ? Composez leUtilisation du Outil Rotatif Vitesses de fonctionnement Nécessité de vitesses plus lentesPlage de vitesses Laissez la vitesse faire le travail Assemblage et fonctionnement des accessoiresDirectives D’INSTALLATION Larbre flexibleNe tirez pas sur l’arbre Enlèvement et remplacement du morsDirectives D’USAGE Débranchement de l’arbre Flex-ShaftLe guide de coupe Sil présente un coudeNE PAS Utiliser SUR LES Carreaux Céramiques DE Planchers Pour régler la profondeur de coupe Nettoyage du coulis Kit pour l’extraction de coulisMode d’emploi Assemblage et Fonctionnement des Accessoires’une utilisation prolongée Dentraînement SerrerRallonges Renseignements sur l’entretienEntretien Nettoyage566 Nécessaire de coupe de céramique Accessoires DremelAccessoire toupie Arbre flexibleCouteaux au carbure de tungstène DouillesMandrins Couteaux à grande vitesseBrosses en soie de porc Accessoires de polissageAccessoires de ponçage Brosses métalliquesAccessoires Dremel suite Avertissement Selon le sens de coupe par rapport au grain du bois Réglages DE VitesseAcier Réglages DE Vitesse Continental DES ÉTATS-UNIS Garantie limitée de DremelÉTATS-UNIS Canada ’EXTÉRIEUR DU TerritoireDM 2610925474 10-04 10/19/04 340 PM Modelos 275T6 F013027503 285T6 F013028503 395T6 F013039504 Manual del usuario MultiPro Herramienta GiratoriaConserve Estas Instrucciones Normas de seguridad para herramientas mecánicasServicio Normas de seguridad para herramientas giratoriasNormas de seguridad para herramientas giratorias De Ni-Cd SímbolosDescripción funcional y especificaciones Herramienta Giratoria 275T6, 285T6Herramienta Giratoria 395T6 Accesorio de ángulo recto Eje flexibleJuego de Cortadores multiusoMandril DE Apriete SIN Llave Dremel EnsamblajeBoton DE Fijacion DEL EJE Llave DE Portaherramienta Cuadro DE Identificacion DE PortaherraInstrucciones de utilización Afilar herramientasDar forma a madera Desbarbar metal Tallar madera Cortar Bloquea el flujo de aire y hace que el motor se recaliente ¿Preguntas o problemas? Llame alConsejos de funcionamiento Utilización de la Herramienta GiratoriaVelocidades de funcionamiento Necesidades de velocidades más lentasIntervalo de velocidad Paso Montaje y funcionamiento de los aditamentos¡Deje que la velocidad haga el trabajo Instrucciones Para LA InstalaciónInstrucciones Para Operar No Para Utilizar CON Cerámica DE Piso Montaje y Funcionamiento de los AccesoriosLa guía de corte Radio DE 127 mmCómo ajustar la profundidad de corte Al Limpiar Lechada Juego para quitar lechadaAdvertencias de Seguridad para la Remoción de Lechada Aditamento en ángulo recto Cordones de extensión Información de mantenimientoServicio LimpiezaColumna para taladro Aditamentos para DremelEje flexible Aditamento de fresadoraAccesorios para la Dremel Ruedas abrasivas de óxido de aluminio Cepillos de cerdaPresión de cepillado Accesorios para pulirBroca para cortar pared de tipo seco Ruedas de corteBrocas de fresadora de alta velocidad Broca de corte en espiralAdvertencia Posiciones DE Velocidad Ceramica Accesorios Para Pulir Coahuila Aguascalientes Distrito FederalZona Poniente Chihuahua Zona CentroOaxaca Guerrero MorelosNuevo Leon JaliscoQueretaro Tabasco YucatanTamaulipas Quintana ROOGarantía limitada Dremel Estados UnidosCanada Fuera DE LOS Territorios DM 2610925474 10-04 10/19/04 340 PM Models Modèles Modelos Modelo Description Descripcion NO. DE LA PieceNumero DE Pieza Description Descripcion Code no Model NO. DE Code ModèleDescription Descripcion Dremel Cutting GuideCompression Spring Resorte Ressort Description DescripcionDM 2610925474 10-04 10/19/04 340 PM DM 2610925474 10-04 10/19/04 340 PM Outside Dremel Limited WarrantyTwenty-First StreetOR Racine, Wisconsin 53406 Canada

275T6, 285T6, 395T6 specifications

Bosch Power Tools has long been a trusted name for professionals and DIY enthusiasts alike, and the models 275T6, 285T6, and 395T6 demonstrate the brand's commitment to innovation, durability, and high performance. Each of these tools is meticulously designed to cater to various applications while delivering efficiency and reliability.

The Bosch 275T6 is a versatile tool that embodies power and precision. This corded electric tool features a robust motor that delivers exceptional torque and speed, making it ideal for heavy-duty tasks. One of its standout features is the variable speed control, allowing users to customize operation according to the material being worked on. Additionally, its ergonomic design ensures comfort during prolonged use, minimizing user fatigue. The 275T6 also incorporates advanced safety features, including a lock-on switch that prevents accidental activation and a protective housing that extends the tool's lifespan.

Next in line is the Bosch 285T6, which takes versatility a step further. This model is equipped with an innovative multi-functional design, allowing it to perform a variety of tasks, from drilling to sanding. Noteworthy is its quick-change chuck system, which enables users to switch between accessories with ease and efficiency. The 285T6 also features an integrated LED light that illuminates work areas, making it particularly useful in low-light conditions. Its lightweight construction does not compromise on durability, ensuring it can withstand rigorous use without hassle.

Finally, the Bosch 395T6 is designed for those who demand the highest performance under extreme conditions. This model boasts a heavy-duty motor that is optimized for high torque applications, making it perfect for demanding jobs in both wood and metal. The 395T6 incorporates tooth-tipped technology, enhancing cutting efficiency and prolonging blade life. In terms of user experience, the tool incorporates anti-vibration technology, which significantly reduces vibrations during operation, promoting stability and precision.

In summary, Bosch Power Tools' 275T6, 285T6, and 395T6 models are excellent choices for anyone in need of reliable and powerful tools. They come equipped with features that enhance user comfort, safety, and versatility. The combination of premium materials and innovative technology ensures these tools stand out in any toolbox, offering a robust solution for a wide range of applications. With Bosch, users can be assured of quality that translates into outstanding performance.
Top Page Image Contents