DeWalt DWE4010 DWE4010T manual Maintenance

Page 11

ENGLISH

Spindle Lock (fig. 1)

The spindle lock (b) is provided to prevent the spindle from rotating when installing or removing wheels. Operate the spindle lock only when the tool is turned off, unplugged from the power supply, and has come to a complete stop.

NOTICE: To reduce the risk of damage to the tool, do not engage the spindle lock while the tool is operating. Damage to the tool will result and attached accessory may spin off possibly resulting in injury.

To engage the lock, depress the spindle lock button and rotate the spindle until you are unable to rotate the spindle further.

Metal Applications

When using the tool in metal applications, make sure that a residual current device (RCD) has been inserted to avoid residual risks caused by metal swarf.

If the power supply is shut off by the RCD, take the tool to an authorised DEWALT repair agent.

WARNING: In extreme working conditions, conductive dust can accumulate inside the machine housing when working with metal. This can result in the protective insulation in the machine becoming degraded with a potential risk of an electrical shock.

To avoid build-up of metal swarf inside the machine, we recommend to clear the ventilation slots on a daily basis. Refer to Maintenance.

Using Flap Discs

WARNING: Metal dust build-up. Extensive use of flap discs in metal applications can result in the increased potential for electric shock. To reduce this risk, insert an RCD before use and clean the ventilation slots daily by blowing dry compressed air into the ventilation slots inaccordance with the below maintenance instructions.

MAINTENANCE

Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories. Bewfore reconnecting the tool, depress and release the trigger switch to ensure that the tool is off.

Pop-off Brushes

The motor will be automatically shut off indicating that the carbon brushes are nearly worn out and that the tool needs servicing. The carbon brushes are not user-serviceable. Take the tool to an authorised DEWALT repair agent.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure.

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Optional Accessories

WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT recommended accessories should be used with this product.

Consult your dealer for further information on the appropriate accessories.

9

Image 11
Contents DWE4010 DWE4010T ﺍﻝﻉﺭﺏﻱﺓ ﻡﺕﺭﺝﻡ ﻉﻥ ﺍﻝﺕﻉﻝﻱﻡﺍﺕ ﺍﻝﺃﺹﻝﻱﺓ DWE4010 DWE4010Tc ﻞﻜﺷ Denotes risk of electric shock Denotes risk of fire Technical DataDefinitions Safety Guidelines CongratulationsUse of an RCD reduces the risk of electric shock Additional Specific Safety RulesSafety Instructions for All Operations Causes and Operator Prevention of Kickback Markings on Tool Safety Warnings Specific for Grinding OperationsPackage Contents Residual RisksAssembly and Adjustments Operation Maintenance Protecting the Environment Dommages corporels graves FélicitationsCaractéristiques techniques Définitions consignes de sécuritéUtilisation ET Entretien DES Outils Électriques Sécurité IndividuelleRéparation Règles Particulières DE Sécurité AdditionnellesConsignes générales de sécurité Consignes spécifiques de sécurité propres au meulage Causes et prévention anti-rebondsSécurité électrique Risques résiduelsÉtiquettes sur l’appareil Contenu de l’emballageMounting and Removing the Guard fig Installation de la poignée latérale figUtilisation d’une rallonge Montage ET RéglagesConsignes d’utilisation Position correcte des mains figAvant tout utilisation FonctionnementBalais autorupteurs Bouton de blocage de l’arbre figApplications métal Utilisation de disques à lamellesProtection de l’environnement Accessoires en optionﺔﻴﺋﺎﺑﺮﻬﻜﻟﺍ ﺕﺍﻭﺩﻸﻟ ﺔﻣﺎﻌﻟﺍ ﻥﺎﻣﻷﺍ ﺕﺍﺮﻳﺬﺤﺗ ﺔﻴﻨﻔﻟﺍ ﺕﺎﻧﺎﻴﺒﻟﺍﻥﺎﻣﻷﺍ ﺕﺎﻤﻴﻠﻌﺗ ﺕﺎﻔﻳﺮﻌﺘﻟﺍ ﺔﻴﻓﺎﺿﻹﺍ ﺓﺩﺪﺤﻤﻟﺍ ﻥﺎﻣﻷﺍ ﺪﻋﺍﻮﻗ ﺎﻬﻤﻄﺤﺗ ﻲﻓ تﺎﻧاﻮﻄﺳﻷا ﺦﻠﺠﻟﺍ ﺕﺎﻴﻠﻤﻌﺑ ﺔﺻﺎﺨﻟﺍ ﺔﻣﻼﺴﻟﺍ ﺕﺍﺮﻳﺬﺤﺗﺔﻴﻘﺒﺘﻤﻟﺍ ﺮﻃﺎﺨﻤﻟﺍ ﺓﺍﺩﻷﺍ ﻰﻠﻋ ﺕﺎﻣﻼﻌﻟﺍﻂﺒﻀﻟﺍﻭ ﻊﻴﻤﺠﺘﻟﺍ ﺕﺎﻴﻠﻤﻋ ﺔﻴﺋﺎﺑﺮﻬﻜﻟﺍ ﺔﻣﻼﺴﻟﺍﻂﺳﻭﻷﺍ ﻕﺮﺸﻟﺍ ﻲﺴﻴﺋﺮﻟﺍ ﺭﺎﻴﺘﻟﺍ ﺲﺑﺎﻗ ﻝﺍﺪﺒﺘﺳﺍ ﺎﻴﻘﻳﺮﻓﺇﻭ ﺔﻟﺎﻄﺘﺳﻻﺍ ﻞﺑﺎﻛ ﻡﺍﺪﺨﺘﺳﺍﺢﻴﺗﺎﻔﻤﻟﺍ 6ﻭ ،1 ﻥﻼﻜﺸﻟﺍ ﺢﻴﺤﺼﻟﺍ ﺪﻴﻟﺍ ﻊﺿﻮﻣﺦﻠﺠﻟﺍ ﺹﺮﻗ ﺔﻟﺍﺯﺇﻭ ﺐﻴﻛﺮﺗ 5ﻭ ،4ﻭ ،1 ﻝﺎﻜﺷﻷﺍﺔﻴﻧﺪﻌﻤﻟﺍ ﺕﺎﻘﻴﺒﻄﺘﻟﺍ ﻒﻴﻈﻨﺘﻟﺍﺔﻳﺭﺎﻴﺘﺧﻻﺍ ﺕﺎﻘﺤﻠﻤﻟﺍ ﺔﺌﻴﺒﻟﺍ ﺔﻳﺎﻤﺣPage Page Page Iraq N365700 11/13