DeWalt DWE4010 DWE4010T manual Congratulations, Technical Data, Definitions Safety Guidelines

Page 5

ENGLISH

ANGLE GRINDERS

DWE4010, DWE4010T

Congratulations!

General Power Tool Safety Warnings

You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users.

Technical Data

 

 

DWE4010

DWE4010T

 

 

 

 

Voltage

VAC

220–240

220–240

 

 

120

120

Type

 

1

1

Power input

W

730

730

No-load/rated speed

min-1

11000

11000

Wheel diameter

mm

115

115

Grinding Wheel thickness mm

6

6

Wheel Type

 

27

27

Spindle diameter

 

M14

M14

Weight

kg

1.8

1.87

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.

WARNING: To reduce the risk of injury, read the instruction manual.

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

1)WORK AREA SAFETY

a)Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2)ELECTRICAL SAFETY

a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b)Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e)When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f)If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.

3

Image 5
Contents DWE4010 DWE4010T ﺍﻝﻉﺭﺏﻱﺓ ﻡﺕﺭﺝﻡ ﻉﻥ ﺍﻝﺕﻉﻝﻱﻡﺍﺕ ﺍﻝﺃﺹﻝﻱﺓ DWE4010 DWE4010Tc ﻞﻜﺷ Definitions Safety Guidelines Technical DataCongratulations Denotes risk of electric shock Denotes risk of fireUse of an RCD reduces the risk of electric shock Additional Specific Safety RulesSafety Instructions for All Operations Causes and Operator Prevention of Kickback Package Contents Safety Warnings Specific for Grinding OperationsResidual Risks Markings on ToolAssembly and Adjustments Operation Maintenance Protecting the Environment Caractéristiques techniques FélicitationsDéfinitions consignes de sécurité Dommages corporels gravesUtilisation ET Entretien DES Outils Électriques Sécurité IndividuelleRéparation Règles Particulières DE Sécurité AdditionnellesConsignes générales de sécurité Consignes spécifiques de sécurité propres au meulage Causes et prévention anti-rebondsÉtiquettes sur l’appareil Risques résiduelsContenu de l’emballage Sécurité électriqueUtilisation d’une rallonge Installation de la poignée latérale figMontage ET Réglages Mounting and Removing the Guard figAvant tout utilisation Position correcte des mains figFonctionnement Consignes d’utilisationApplications métal Bouton de blocage de l’arbre figUtilisation de disques à lamelles Balais autorupteursProtection de l’environnement Accessoires en optionﺔﻴﺋﺎﺑﺮﻬﻜﻟﺍ ﺕﺍﻭﺩﻸﻟ ﺔﻣﺎﻌﻟﺍ ﻥﺎﻣﻷﺍ ﺕﺍﺮﻳﺬﺤﺗ ﺔﻴﻨﻔﻟﺍ ﺕﺎﻧﺎﻴﺒﻟﺍﻥﺎﻣﻷﺍ ﺕﺎﻤﻴﻠﻌﺗ ﺕﺎﻔﻳﺮﻌﺘﻟﺍ ﺔﻴﻓﺎﺿﻹﺍ ﺓﺩﺪﺤﻤﻟﺍ ﻥﺎﻣﻷﺍ ﺪﻋﺍﻮﻗ ﺔﻴﻘﺒﺘﻤﻟﺍ ﺮﻃﺎﺨﻤﻟﺍ ﺦﻠﺠﻟﺍ ﺕﺎﻴﻠﻤﻌﺑ ﺔﺻﺎﺨﻟﺍ ﺔﻣﻼﺴﻟﺍ ﺕﺍﺮﻳﺬﺤﺗﺓﺍﺩﻷﺍ ﻰﻠﻋ ﺕﺎﻣﻼﻌﻟﺍ ﺎﻬﻤﻄﺤﺗ ﻲﻓ تﺎﻧاﻮﻄﺳﻷاﻂﺳﻭﻷﺍ ﻕﺮﺸﻟﺍ ﻲﺴﻴﺋﺮﻟﺍ ﺭﺎﻴﺘﻟﺍ ﺲﺑﺎﻗ ﻝﺍﺪﺒﺘﺳﺍ ﺎﻴﻘﻳﺮﻓﺇﻭ ﺔﻴﺋﺎﺑﺮﻬﻜﻟﺍ ﺔﻣﻼﺴﻟﺍﺔﻟﺎﻄﺘﺳﻻﺍ ﻞﺑﺎﻛ ﻡﺍﺪﺨﺘﺳﺍ ﻂﺒﻀﻟﺍﻭ ﻊﻴﻤﺠﺘﻟﺍ ﺕﺎﻴﻠﻤﻋﺦﻠﺠﻟﺍ ﺹﺮﻗ ﺔﻟﺍﺯﺇﻭ ﺐﻴﻛﺮﺗ 6ﻭ ،1 ﻥﻼﻜﺸﻟﺍ ﺢﻴﺤﺼﻟﺍ ﺪﻴﻟﺍ ﻊﺿﻮﻣ5ﻭ ،4ﻭ ،1 ﻝﺎﻜﺷﻷﺍ ﺢﻴﺗﺎﻔﻤﻟﺍﺔﻳﺭﺎﻴﺘﺧﻻﺍ ﺕﺎﻘﺤﻠﻤﻟﺍ ﻒﻴﻈﻨﺘﻟﺍﺔﺌﻴﺒﻟﺍ ﺔﻳﺎﻤﺣ ﺔﻴﻧﺪﻌﻤﻟﺍ ﺕﺎﻘﻴﺒﻄﺘﻟﺍPage Page Page Iraq N365700 11/13