Cisco Systems STEV SRT-M-66, 2654T6 appendix Tools and Equipment, Safety Recommendations

Appendix A Repackaging the Router

Repackaging the Routers

REVIEW DRAFT — CISCO CONFIDENTIAL

Tools and Equipment

You need the following items to remove the router from the equipment rack and repackage it for shipping:

•ESD-preventive wrist strap

•Flat-blade screwdrivers

•Number 1 and number 2 Phillips screwdrivers

•3/8-inch (10-mm) nutdriver (for systems equipped with the DC-input power shelf)

•9/16-inch (14-mm wrench) wrench

•3/4-inch (19-mm) socket and ratchet wrench

•Safety hand truck with retractable safety leg wheels and security strap, such as the Stevens Appliance Truck Company “Escort,” Model STEV SRT-M-66 (distributed by McMaster-Carr as Model 2654T6), or an equivalent safety hand truck.

•Antistatic sacks or other ESD-preventive storage environment

•The original router shipping package supplied by Cisco. If you do not have the original router shipping package, contact your Cisco service representative for assistance.

Safety Recommendations

Before you begin the procedures in this appendix, review the following safety information:

•The safety recommendations listed in the“Safety Recommendations” section on page 2-2in Chapter 2, “Preparing for Installation.”

•The safety warnings listed in the publication Regulatory Compliance and Safety Information for the Cisco 12000 Series Internet Router that accompanied your router

	Cisco XR 12416 Router Chassis Installation Guide
A-6	OL-xxxxx-xx