Grizzly G0459P owner manual Pillow Block Bearings

Pillow Block Bearings

These must be lubricated every 20 hours of operation. Use a grease gun to pump one or two shots of a high-quality grease into each grease fit- ting (Figure 22), located on the top of each pillow block bearing.

Failure to routinely inspect your drum sander for damage and wear could result in unsatis- factory work results, premature component or machinery failure, or operator injury. We recommend you create a checklist for routine inspection and maintenance. Remember to always disconnect the drum sander from its power source before attempting to inspect, adjust, or repair this machine!

Figure 22. Location to lubricate pillow block

bearing.

-26- Model G0459/G0459P (Mfg. 7/11+)