Grizzly G0459P owner manual Operations, Operation Overview

SECTION 4: OPERATIONS

Operation Overview

I]ZejgedhZd[i]^hdkZgk^Zl^hidegdk^YZi]Zcdk" ^XZbVX]^cZdeZgVidgl^i]VWVh^XjcYZghiVcY^c\ d[]dli]ZbVX]^cZ^hjhZYYjg^c\deZgVi^dc!hd i]ZbVX]^cZXdcigdah$XdbedcZcihY^hXjhhZYaViZg ^ci]^hbVcjVaVgZZVh^ZgidjcYZghiVcY#

9jZ id i]Z \ZcZg^X cVijgZ d[ i]^h dkZgk^Zl! ^i ^h not^ciZcYZYidWZVc^chigjXi^dcVa\j^YZ#IdaZVgc bdgZ VWdji heZX^[^X deZgVi^dch! gZVY i]^h Zci^gZ bVcjVa VcY hZZ` VYY^i^dcVa igV^c^c\ [gdb ZmeZ" g^ZcXZY bVX]^cZ deZgVidgh! VcY Yd VYY^i^dcVa gZhZVgX]djih^YZd[i]^hbVcjVaWngZVY^c\]dl" idWdd`h!igVYZbV\Vo^cZh!dglZWh^iZh#

To reduce the risk of serious injury when using this machine, read and understand this entire manual before operating.

Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine.

To complete a typical operation, the operator does the following:

1.Examines the workpiece to make sure it is suitable for sanding.

2.Places the workpiece on the conveyor table under or next to the front pressure roller, and adjusts the table height until the top surface of the workpiece just touches the front pres- sure roller.

3.Checks the outfeed side of the machine to make sure the workpiece can safely pass all the way through without interference from other objects.

4.Wears safety glasses and a respirator.

5.Starts the dust collector.

6.Turns the sander ON, adjusts conveyor speed, places the workpiece flat on the conveyor, then lets the conveyor feed the workpiece into the sander.

7.Slowly raises the conveyor table using the hand crank until the sandpaper begins sand- ing the workpiece.

8.Stands at the side of the sander and retrieves the workpiece from the outfeed end.

9.Stops the machine.

NOTICE

If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, review industry trade magazines, or get formal training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.

-18- Model G0459/G0459P (Mfg. 7/11+)