CHAPTER 4: USING THE METER
ZPress the RIGHT button to display the rSt ALL? YES message.
Resetting the maximum and minimum value requires entry of a
ZPress ENTER to display the password screen.
If password is enabled in the software, the screen displays the PASS message in the “A” screen and 4 dashes in the “B” screen, with the
ZUsing the DOWN button, select 0 to 9 for the flashing digit.
ZWhen the desired number appears, use the RIGHT button to select it and move to the next digit.
ZWhen all four password digits have been selected, press ENTER.
If the correct password has been entered, the rSt ALL donE message appears and the screen returns to
EPM 6000 |