GE EPM 6000 Multi-function Power Metering System instruction manual Operating Mode

CHAPTER 4: USING THE METER

4.4Operating Mode

4.4.1 Description

Operating mode is the EPM 6000 meter’s default mode. If scrolling is enabled, the meter automatically scrolls through these parameter screens after startup. The screen changes every 7 seconds. Scrolling is suspended for 3 minutes after any button is pressed.

Push the DOWN button to scroll all the parameters in operating mode. The active parameter has the indicator light next to it on the right face of the meter. Push the RIGHT button to view additional displays for that parameter. A table of the possible displays in the operating mode is below. Refer to Operating Mode Screens on page 6–3 for a detailed navigation map of the operating mode.

Table 4–3: Operating Mode Parameter Readings

Parameter		Possible display readings
designator
VOLTS L-N	VOLTS_LN	VOLTS_LN_	VOLTS_LN_	VOLTS_LN_
		MAX	MIN	THD
VOLTS L-L	VOLTS_LL	VOLTS_LL_	VOLTS_LL_
		MAX	MIN
AMPS	AMPS_MAX	AMPS_MIN	AMPS_THD
W/VAR/PF	W_VAR_PF	W_VAR_PF	W_VAR_PF	W_VAR_PF
		_MAX_POS	_MIN_POS	_MAX_NEG
VA/Hz	VA_FREQ	VA_FREQ_	VA_FREQ_ MIN
		MAX
Wh	KWH_REC	KWH_DEL	KWH_NET
VARh	KVARH_ POS	KVARH_ NEG	KVARH_ NET
VAh	KVAH

Readings or groups of readings are skipped if not applicable to the meter type or hookup, or if explicitly disabled in the programmable settings.

EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE 4–17