Hitachi W 8VB, W 6VB2 instruction manual Assembly and Operation, Applications, Prior to Operation

Page 10

English

ASSEMBLY AND OPERATION

APPLICATIONS

◯Tightening hex. head screws

◯Tightening Drywall screws, wood screws and self-drilling screws

NOTE:

For tightening the Self-drilling screws, sub-stopper (B) and non-magnetic bit holder (sold separately) are recommended.

PRIOR TO OPERATION

1.Power source

Ensure that the power source to be utilized conforms to the power source re- quirements specified on the product nameplate.

2.Power switch

Ensure that the switch is in the OFF position. If the plug is connected to a recep- tacle while the switch is in the ON position, the power tool will start operating immediately and can cause serious injury.

3.Extension cord

When the work area is far away from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable.

WARNING: Damaged cord must be replaced or repaired.

4.Check the receptacle

If the receptacle only loosely accepts the plug, the receptacle must be repaired. Contact a licensed electrician to make appropriate repairs.

If such a fautly receptacle is used, it may cause overheating, resulting in a seri- ous hazard.

5.Confirming condition of the environment:

Confirm that the work site is placed under appropriate conditions conforming to prescribed precautions.

10

Image 10

Contents 6VB2 W 8VB Contents Meanings of Signal Words Important InformationSafety General Safety RulesEnglish Keep all screws, bolts and covers tightly in place Specific Safety Rules and Symbols Do not wipe plastic parts with solventDouble Insulation for Safer Operation Functional Description SpecificationsName of Parts Applications Assembly and OperationPrior to Operation Adjusting the tightening depth Fig Confirm the direction of bit rotation FigMounting the bit HOW to USE the Screw DriverSwitch operation and rotational speed adjustment Screw driver operationDismounting the hex-socket Fig Mounting and Dismounting the HEX-SOCKET or the BITTightening Self-drilling screw Dismounting the bit FigMaintenance and Inspection For hex-head screws AccessoriesStandard Accessories For other screwsPlastic case Code No Hook Code No Informations Importantes Signification DES Mots D’AVERTISSEMENTRegles Generale DE Securite SecuriteConserver CES Instructions Français Utiliser l’outil correct Garder propres les évents d’air du moteur Regles DE Securite Specifiques ET Symboles Double Isolation Pour UN Fonctionnement Plus SUR Description Fonctionnelle NOM DES PartiesAvant L’UTILISATION Vérifier la direction de la tête de vissage Réglage de la profondeur de serrage FigFonctionnement de la visseuse Comment Utiliser LA VisseusePour vis autoperceuses à tête ronde Fig Sens de rotation du manchon six pansSerrage d’une vis auto-foreuse Démontage du manchon six pans FigEntretien ET Inspection Pour vis à tête six pans AccessoiresAccessoires Standard Pour les autres visBoîtier en plastique No. de code Crechet No. de code Información Importante Significado DE LAS Palabras DE SeñalizaciónNormas Generales DE Seguridad SeguridadGuarde Estas Instrucciones Español Utilice la herramienta correcta Maneje con cuidado las herramientas eléctricas Normas Y Símbolos Específicos DE Seguridad ¡GUARDE Este Manual DE Instrucciones Donde Aislamiento Doble Para Ofrecer UNA Operación MÁS SeguraNomenclatura Descripción FuncionalEspecificaciones Aplicaciones Montaje Y OperaciónAntes DE LA Operación Confirmar la dirección de rotación de la broca Fig Ajustar la profundidad de apretado FigFuncionamiento del destornillador Como Usar EL DestornilladorDirección de giro del portatornillos Inserción de tornillos autotaladradores Desmontaje de la broca Desmontaje del portatornillo hexagonalCuando montre el portatornillo hexagonal o la broca Mantenimiento E Inspección Para tornillos cabeza hexagonal AccesoriosAccesorios Estándar Para otros tornillosCaja de plástico Num. de código Gancho Num. de código Page Page Page Page 812