Black & Decker BDCS2406, 90537965 Accessories, Abrasive Type or Metal Cutting Blades on SAW

Page 16

90537965 BD Circ Saws 5/30/08 10:11 AM Page 16

MAINTENANCE

REMOVE BATTERY FROM SAW WHEN PERFORMING ANY CLEANING OR OTHER MAINTENANCE.

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts

Accessories

Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:

1-800-544-6986.

WARNING: The use of any accessory not recommended for use with this tool could be hazardous.

Model

BDCS1806

BDCSL1806

BDGCS1806

BDCS2406

Blade Diameter

6-1/2 inch (165mm)

BDCS1807

7-1/4 inch (185mm)

Only use thin kerf blades. Using thicker blades will hamper performance of saw. Carbide blades are strongly recommended for optimum saw performance. NEVER USE

ABRASIVE TYPE OR METAL CUTTING BLADES ON SAW.

 

Troubleshooting

 

Problem

Possible Cause

Possible Solution

• Unit will not start.

• Battery not installed properly.

• Check battery

 

 

installation.

 

• Battery not charged.

• Check battery charging

 

 

requirements.

• Battery will not charge. • Battery not inserted into charger.

• Charger not plugged in.

Insert battery into charger until red LED appears.

Plug charger into a working outlet. Refer to “Important Charging Notes” for more details.

• Surrounding air temperature

• Move charger and tool to

too hot or too cold.

a surrounding air

 

temperature of above 40

 

degrees F(4,5°C) or below

 

105 degrees F (+40,5°C).

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

16

Image 16
Contents Save this Manual for Future Reference BDCSL1806 BDGCS1806VEA EL Español EN LA Contraportada Electrical Safety Personal SafetyWork Area Tool Use and CareService Causes and Operator Prevention of KickbackAdditional Safety Rules Circular Saws Guard Against Kickback Safety Instructions Lasers BDCSL1806 onlyTo Reduce the Risk of Kickback Safety Guidelines Definitions Per minuteSafety Warnings and Instructions Charging Charging the Battery Important Charging NotesBattery CAP Information FIG. C Overview Figure D 11a13a Cutting Depth Adjustment Figures I & J Bevel Angle Adjustment Figure KOperating Instructions General Cuts Shoe Adjustment for 90 CutsAttaching and Removing the Blade Figure L, L1 Switch Installing the Batteries Figure NOperating the Laser BDCSL1806 only Automatic Electric BrakeSawing Operation Accessories Abrasive Type or Metal Cutting Blades on SAWFull TWO-YEAR Home USE Warranty Service InformationRbrc Seal Guide D’UTILISATION Conserver CE Manuel Pour UN Usage UltérieurConserver CES Mesures Zone DE Travail Sécurité PersonnelleUtilisation ET Entretien DE L’OUTIL Mesures DE Sécurité Relatives À L’ÉLECTRICITÉMesures DE Sécurité Spécifiques EntretienMesures DE Sécurité Additionnelles Scies circulaires Cause de rebonds et mesures de préventionMesures Pour Minimiser LES Risques DE Rebonds Mesures de précaution contre les rebondsLa scie ce qui favorise la torsion de la lame BD Circ Saws 5/30/08 1011 AM Lignes Directrices EN Matière DE Sécurité Définitions La minuteAvertissements de sécurité et directives chargement Charge DE BatterieRemarques Importantes DE Chargement Information Concernant LE Capuchon DU BLOC-PILE FIG. C Avertissement S’assurer, auWron g 13a Préparation pour l’assemblage et le réglage Réglage DE L’ANGLE DE Biseau Figure KFonctionnement Coupes GénéralesRéglage DE LA Semelle Pour LES Coupes DE SE Protéger DES Effets DE RebondDétente Utilisation DU Laser BDCSL1806 SeulementFrein Électrique Automatique Laser Intégré Mise EN MARCHE/ARRÊT DU LaserRetirer LE BLOC-PILES DE LA Scie Avant DE Régler LE Laser Pour Utiliser LE Trait LaserAccessoires Opérations DE SciageDécoupe EN Poche Figure Q DE Matières Abrasives Avec LA ScieDépannage Information SUR LES RéparationsCaractéristiques Techniques DU Laser Manual DE Instrucciones Conserve Este Manual Para Futuras ConsultasReglas Generales DE Seguridad Conserve Estas InstruccionesArea de trabajo Seguridad PersonalServicio Reglas DE Seguridad EspecificasReglas DE Seguridad Adicionales Sierras Circulares Causas DEL Contragolpe Y Prevención POR Parte DEL OperadorLos que promueve que el disco cambie de dirección Protéjase contra el ContragolpePara Reducir EL Riesgo DE Contragolpe Instrucciones DE Seguridad Para EL Láser BDCSL1806 Solamente Pautas DE SEGURIDAD/DEFINICIONES Minutos Corriente alterna Corriente directaConstrucción clase Terminales de Conexión a tierre Revoluciones oUtilice un solo cargador cuando carga Instrucciones y advertencias de seguridad cargaCarga DE LA Batería Información Acerca DEL Protector DE LA Batería FIG. C Notas Importantes Sobre LA CargaDescripción DE LAS Funciones Figura D Mango principal13a 2726 Instrucciones DE Operación Cortes GeneralesRegulación DEL Ángulo DE Bisel Figura K Ajuste DE LA Zapata Para Cortes DEColocación Y Remoción DE LA Hoja Figuras L Y L1 InterruptorFreno Eléctrico Automático Apague y encienda la sierra cuatro o cinco vecesLáser Incorporado EN LA Unidad USO DEL Láser BDCSL1806 SolamenteApagado Y Encendido DEL Láser Operación DE Corte Para Usar LA Línea LáserCortes Internos Figura Q Accesorios EL Sello Rbrc CULIACAN, SIN MEXICO, D.FMERIDA, YUC MONTERREY, N.LBD Circ Saws 5/30/08 1011 AM

BDCS1807, BDGCS1806, BDCSL1806, BDCS1806, BDCS2406 specifications

Black & Decker has long been recognized for its high-quality tools, and the models 90537965, BDCS1806, BDCSL1806, BDCS2406, and BDGCS1806 exemplify the brand's commitment to innovation and user-friendly design. These cordless tools are ideal for both amateur handymen and seasoned professionals, delivering efficiency and convenience.

The Black & Decker 90537965 features a robust design, with a focus on power and durability. It offers a lithium-ion battery that ensures a longer runtime, making it perfect for extended tasks without the worry of running out of power. Its compact size allows for easy maneuverability in tight spaces, making it an essential tool for any toolbox.

The BDCS1806 is a versatile cordless screwdriver that makes light work of DIY projects. It is equipped with an ergonomic handle that enhances comfort during extended use. The forward and reverse switch allows for easy operation, while the built-in LED work light illuminates dark areas, ensuring precision even in low-light conditions. With a lightweight design, it reduces user fatigue while providing substantial power for various applications.

Next, the BDCSL1806 adds another layer of versatility with its variable speed settings. This feature allows users to adjust the speed for different tasks, ensuring optimal control whether driving screws or removing them. The battery charge indicator keeps the user informed of remaining power, minimizing downtime.

For those looking for a more powerful option, the BDCS2406 stands out with its heavy-duty capabilities. This model boasts increased torque, making it ideal for tougher materials. It also includes a quick-change chuck, enabling rapid bit changes without the need for additional tools, thereby enhancing productivity.

Finally, the BDGCS1806 is a game-changer with its innovative design. It integrates a compact and lightweight structure that does not compromise on performance. Like its counterparts, it features a lithium-ion battery that provides exceptional longevity and consistent power delivery.

In summary, Black & Decker's 90537965, BDCS1806, BDCSL1806, BDCS2406, and BDGCS1806 models combine cutting-edge technology with user-centric design. Their exceptional features, such as ergonomic handles, variable speed settings, and powerful lithium-ion batteries, make these tools indispensable for anyone seeking reliability and performance in their tool collection.