Atari 040-0050-01 manual Game Selection, Player Control Test

Page 33

Section 4 – Using the Game Operator Menu

Game Selection

The Game Selection window allows you to disable installed games so that they are not available to play in the multi-game selection window. Select a title and press the Trigger Button to put an “X” next to the game that you want disabled. When you exit the Operator Menu, the game will be unavailable for play in the Multi-Game Selection. The game is not deleted, and can be re-enabled at any time by removing the “X” in the Game Selection Menu.

If you have installed a game and it does not appear in the Multi-Game Selection window during Attract Mode, or in the Game Selection Menu, check to make sure the Game Dongle is inserted correctly. When a USB Game Dongle is inserted correctly and recognized by the Game Software, it should light up with a red LED.

Player Control Test

The Player Control Test will validate that the controls are set up correctly and working properly. When you press a button, a red arrow will appear on the test screen to indicate which button was pressed, as shown in the picture above. When you move the Joystick in

 

© 2004 GLOBAL VR®, INC.

040-0050-01 Rev. A 10/29/2004

Page 33 of 48

Image 33
Contents GvrSX Conversion Instructions System Manual Table of Figures Table of ContentsPreface Safety FCC Notices United States GvrSX design showcases the following features Game DescriptionGvrSX provides the following benefits to operators Upgrade Steps Clean and Prepare the CabinetCabinet Conversion Remove old Tournament Header and Card Reader Conversion Kit Contents and Replacement Parts List Optional Monitor Upgrade Kit Components PGA-UPGRADE-MTR CDs, Labels, and ManualsArtwork Replace the Monitor Optional Remove the Old MonitorAdapt the Cabinet for the Larger Monitor Page Install the New Monitor Drilling Cabinet Air Holes Install the Cabinet Exhaust FanPage Set Up AC Power Distribution Set Up the HardwareRemove the Game PCB and Install New Hardware +5 VDC Connect the Jamma Conversion Board and UVC+12 VDC GroundHapp Ugci Board Connections Install the Happ Ugci BoardSet Up the Computer Connect the Computer Secure the Computer Upgrade the Control Panel Prepare the Control PanelApply Control Panel Graphics Install Buttons and Connect Wiring Apply the Cabinet Graphics and Marquee Artwork Apply the Serial Number Sticker Run the Joystick Calibration Utility Power on and Test the CabinetUVC DIP Switch Settings Adjust the Universal Video Converter UVCSetting Game Options and Resets Using the Game Operator MenuMachine Menu Game Mode Menu All Audit Coin Stats Game Resets MenuAll Audit Game Stats All High Score StatsGame Purchase Audit Coin AuditsPlayer Control Test Game SelectionMonitor Calibration Test Starting a Game Information Bar Description Playing a Beach Head GameUSB Game Dongles Operating System Restore CD System Software CDsGame Software CDs Troubleshooting Video Problems TroubleshootingTroubleshooting Audio Problems Problem Possible Cause Possible SolutionTroubleshooting Computer Problems Troubleshooting Miscellaneous Problems Troubleshooting Control ProblemsTroubleshooting Configuration with New Wells-Gardner Monitor Diagrams and SchematicsDetailed Wiring Diagram Computer Rear Panel Diagram Computer Rear Panel DiagramWarranty Information Warranty ServicePage Technical Support