Atari 040-0050-01 manual Machine Menu

Page 29

Section 4 – Using the Game Operator Menu

Machine Menu

The Machine menu is the default screen displayed when you press the Operator Button. It displays the information described in the table below:

Serial #

Reserved for future use of Multi-Player or Tournament-Enabled Games.

Machine Type

Reserved for future use of Multi-Player or Tournament-Enabled Games.

Hardware Version

Reserved for future use of Multi-Player or Tournament-Enabled Games.

Inserted Credits

This tells the number of Credits and Coins that have been inserted on this

cabinet.

 

Reset Credit Button

This button is used to reset or zero out the Inserted Credits number on this

screen.

 

Attract Mode Sound

This sets up the Attract Mode to be with sound or without. The available

options are: OFF, Occasionally ON, and Always ON.

 

Attract Volume

This will adjust the volume for the game play. The options to choose from

are: OFF, Low, Medium Low, Medium, Medium High, High, and Deafening.

 

Note: Most volume adjustments are made from the Operator Menu. If you cannot get desired results, you can adjust the volume using the Audio Volume potentiometers, R3 and R4 on the Jamma Conversion Board (See Figure 2 on page 17).

 

© 2004 GLOBAL VR®, INC.

040-0050-01 Rev. A 10/29/2004

Page 29 of 48

Image 29
Contents GvrSX Conversion Instructions System Manual Table of Figures Table of ContentsPreface Safety FCC Notices United States GvrSX provides the following benefits to operators GvrSX design showcases the following featuresGame Description Cabinet Conversion Upgrade StepsClean and Prepare the Cabinet Remove old Tournament Header and Card Reader Conversion Kit Contents and Replacement Parts List Artwork Optional Monitor Upgrade Kit Components PGA-UPGRADE-MTRCDs, Labels, and Manuals Adapt the Cabinet for the Larger Monitor Replace the Monitor OptionalRemove the Old Monitor Page Install the New Monitor Drilling Cabinet Air Holes Install the Cabinet Exhaust FanPage Set Up AC Power Distribution Set Up the HardwareRemove the Game PCB and Install New Hardware +5 VDC Connect the Jamma Conversion Board and UVC+12 VDC GroundHapp Ugci Board Connections Install the Happ Ugci BoardSet Up the Computer Connect the Computer Secure the Computer Apply Control Panel Graphics Upgrade the Control PanelPrepare the Control Panel Install Buttons and Connect Wiring Apply the Cabinet Graphics and Marquee Artwork Apply the Serial Number Sticker Run the Joystick Calibration Utility Power on and Test the CabinetUVC DIP Switch Settings Adjust the Universal Video Converter UVCSetting Game Options and Resets Using the Game Operator MenuMachine Menu Game Mode Menu All Audit Coin Stats Game Resets MenuAll Audit Game Stats All High Score StatsGame Purchase Audit Coin AuditsPlayer Control Test Game SelectionMonitor Calibration Test Starting a Game Information Bar Description Playing a Beach Head GameUSB Game Dongles Game Software CDs Operating System Restore CDSystem Software CDs Troubleshooting Video Problems TroubleshootingTroubleshooting Audio Problems Problem Possible Cause Possible SolutionTroubleshooting Computer Problems Troubleshooting Miscellaneous Problems Troubleshooting Control ProblemsTroubleshooting Configuration with New Wells-Gardner Monitor Diagrams and SchematicsDetailed Wiring Diagram Computer Rear Panel Diagram Computer Rear Panel DiagramWarranty Information Warranty ServicePage Technical Support