Siemens: HiPath Wireless System with 2610, 2620 APs
Introduction
SpectraLink's Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink 8000 Wireless Telephones and WLAN infrastructure products. The products listed below have been thoroughly tested in SpectraLink’s lab and have passed VIEW Certification. This document details how to configure Siemens HiPath C10, C100, C1000 Wireless Controllers and 2610 & 2620 access points (APs) with SpectraLink 8000 Wireless Telephones.
Certified Product Summary
Manufacturer: | Siemens HiPath Wireless: |
|
| http://enterprise.usa.siemens.com/products/solutions/ | |
| hipathwireless.html |
|
Approved products: | Wireless Controllers | Access Points |
| C10 † | 2610 † |
| C100 | 2620 † |
| C1000 |
|
RF technology: | 802.11b/g |
|
|
|
|
Radio: | 2.4 – 2.484 GHz |
|
Security: |
|
|
AP firmware version tested: | 3.1.4.03.03 |
|
|
|
|
SpectraLink handset models tested: | e340/h340/i640 | 8020/8030 |
SpectraLink handset software tested: | 89.124 | 122.010 or greater |
SpectraLink radio mode: | 802.11b | 802.11b |
|
|
|
Maximum telephone calls per AP: | 10 | 10 |
Recommended network topology: | Switched Ethernet (recommended) | |
†Denotes products directly used in VIEW Certification testing
Known Limitations
•Beacons are sent from the AP inconsistently; therefore you may see decreased battery life on the handsets.
•A
•Because the Controller configures a virtual subnet, broadcast data cannot be sent to the handsets.
PN: | 3 |