Polycom 1725-36071-001 manual Security

Page 16

Configuration Guide

Security

1.In the VNS Configuration screen, click the Privacy tab.

2.For WPA2 AES-CCKM, click the WPA-PSKoption, clear the WPA v.1 check box, then select the WPA v.2 check box.

3.For WPA TKIP, click the WPA-PSKoption, clear the WPA v.2 check box, then select the WPA v.1 check box.

4.Enter the appropriate pass phrase in the Pre-shared key field.

5.Click the Save button.

There is no hex key available at this time.

16	PN: 1725-36071-001_C.doc

Image 16

Contents View Certified Configuration Guide Siemens Trademark Information Introduction Certified Product SummaryNetwork Topology Installing Software & Configuration Initial Setup Controller Setup Assigning an IP address to a wireless controllerConfiguration Guide Assigning routing protocols to a wireless controller AP registration AP maintenance Setting up SSID, Security and QOS Page Filtering Multicast configuration Security Quality of service Setting up other SSIDsConnecting access points to the controller Wireless APs address assignment 802.11b/g settings For Enable Radios, select the 802.11b check box Enable the radio