Polycom 1725-36071-001 manual Filtering

Page 14

Configuration Guide

Filtering

1.In the VNS Configuration screen, click the Filtering tab.

2.Select Default from the Filter ID drop-down list.

a.Select all three options - In, Out and Allow.

b.Leave the IP:Port as *.*.*.*.

3.Select Non-Authenticatedin the Filter ID drop-down list.

a.Select all 3 options - In, Out and Allow.

b.Leave the IP:Port as *.*.*.*.

4.Click the Save button.

A more secure setup for this topology might be:

Allow	192.168.121.* UDP
Allow	192.168.110.* UDP
Allow	192.168.123.* UDP

Disallow*.*.*.* N/A T

14	PN: 1725-36071-001_C.doc

Image 14

Contents View Certified Configuration Guide Siemens Trademark Information Introduction Certified Product SummaryNetwork Topology Installing Software & Configuration Initial Setup Controller Setup Assigning an IP address to a wireless controllerConfiguration Guide Assigning routing protocols to a wireless controller AP registration AP maintenance Setting up SSID, Security and QOS Page Filtering Multicast configuration Security Quality of service Setting up other SSIDsConnecting access points to the controller Wireless APs address assignment 802.11b/g settings For Enable Radios, select the 802.11b check box Enable the radio