Configuration Guide
Initial Setup
1.The following instructions are for configuring a wireless controller and a number of access points with no prior configuration.
2.All of the initial setup is done via a web interface. Connect a
3.Log onto the controller by opening a web browser and connect to https://192.168.10.1:5825/. The default username is admin; the default password is abc123.
4.Do this step only if it is necessary to reset the controller back to its factory default configuration:
a.Click the Wireless Controller button to open the Wireless Controller Configuration screen.
b.In the navigation pane, click System Maintenance.
c.Click the Reset database to factory default and reboot button.
d.Click the Apply button.
This will reset the database and cause the controller to reboot. It will take three to four minutes before the controller is finished.
6 | PN: |