Polycom 1725-36071-001 manual Multicast configuration

Page 15

Siemens: HiPath Wireless System with 2610, 2620 APs

Multicast configuration

1.In the VNS Configuration screen, click the Multicast tab.

2.Select the Enable Multicast Support check box.

3.From the Defined groups drop-down list, select or enter

Spectralink SVP (224.0.1.116) and click the Add button.

4.Enable Wireless Replication for the multicast selection by selecting the check box beside the entry.

5.Click the Save button.

PN: 1725-36071-001_C.doc

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents View Certified Configuration Guide Siemens Trademark Information Certified Product Summary IntroductionNetwork Topology Installing Software & Configuration Initial Setup Assigning an IP address to a wireless controller Controller SetupConfiguration Guide Assigning routing protocols to a wireless controller AP registration AP maintenance Setting up SSID, Security and QOS Page Filtering Multicast configuration Security Setting up other SSIDs Quality of serviceConnecting access points to the controller Wireless APs address assignment 802.11b/g settings For Enable Radios, select the 802.11b check box Enable the radio
Top Page Image Contents