Configuration Guide
Setting up SSID, Security and QOS
1.Click the VNS Configuration button.
2.Click the Topology tab.
3.Assign a subnet for clients for a specific SSID.
4.Under DHCP Settings:
a.Enter the appropriate address for the Gateway
b.For Mask enter 255.255.255.0.
c.The address range should default to 192.168.121.2 – 192.168.121.254. Change this if you want a limited range of addresses assigned to this subnet.
d.No DNS Servers or WINS is required.
5.Set the Timeout Idle: pre and post to 2.
6.Under Next Hop Routing, set the OSPF Route Cost to 50000.
7.Enter an SSID name.
8.Under Wireless APs, select the b/g check box for each AP.
9.Click the Save button.
12 | PN: |