Siemens: HiPath Wireless System with 2610, 2620 APs
Assigning routing protocols to a wireless controller
1.In the Wireless Controller screen, click Routing Protocols in the navigation pane.
2.Enter 0.0.0.0 for the Destination Address and 0.0.0.0 for the Subnet Mask. Add the appropriate address for the Gateway.
3.Click the Save button.
If dynamic routing (OSPF) is being used, then the default route should be set automatically. However, it is always recommended that you assign a temporary static route in dynamic environments to allow the device to operate immediately without having to wait for the initial updates. Be sure to clear the check box for Override dynamic routes. This will allow dynamic routes to be the default once they arrive.
PN: | 9 |