Polycom 1725-36071-001 manual AP maintenance

Page 11

Siemens: HiPath Wireless System with 2610, 2620 APs

AP maintenance

1.In the Wireless APs screen, click AP Maintenance in the navigation pane.

2.Select the proper image file in the AP Images box and click the

Set as default button.

3.Under Upgrade Behavior select the Upgrade when AP connects using settings from Controlled Upgrade option.

4.Select the Do not upgrade AP images if current image version = upgrade version check box.

5.Under Downgrade Behavior, select the Automatically downgrade AP to default image if AP is at later release number (major/minor rev) check box.

6.Click the Save button.

PN: 1725-36071-001_C.doc

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents View Certified Configuration Guide Siemens Trademark Information Certified Product Summary IntroductionNetwork Topology Installing Software & Configuration Initial Setup Assigning an IP address to a wireless controller Controller SetupConfiguration Guide Assigning routing protocols to a wireless controller AP registration AP maintenance Setting up SSID, Security and QOS Page Filtering Multicast configuration Security Setting up other SSIDs Quality of serviceConnecting access points to the controller Wireless APs address assignment 802.11b/g settings For Enable Radios, select the 802.11b check box Enable the radio
Top Page Image Contents