Polycom 1725-36071-001 manual Quality of service, Setting up other SSIDs

Page 17

Siemens: HiPath Wireless System with 2610, 2620 APs

Quality of service

1.In the VNS Configuration screen, click the Policy tab.

2.From the Quality of Service drop-down list, select Voice VNS w/o WMM; this is required for SpectraLink phones.

3.Click the Save button.

Setting up other SSIDs

1.Repeat the above steps, starting at step 1.

2.Create a new SSID and DHCP pool as before. Each SSID has its own sub-net.

3.Use the same filtering settings as before.

4.Set up privacy as required.

5.If creating a sub-net for data, select Best Effort in the Policy page.

Make sure the proper SSID is selected on each page as it is being configured.

PN: 1725-36071-001_C.doc

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents View Certified Configuration Guide Siemens Trademark Information Certified Product Summary IntroductionNetwork Topology Installing Software & Configuration Initial Setup Assigning an IP address to a wireless controller Controller SetupConfiguration Guide Assigning routing protocols to a wireless controller AP registration AP maintenance Setting up SSID, Security and QOS Page Filtering Multicast configuration Security Setting up other SSIDs Quality of serviceConnecting access points to the controller Wireless APs address assignment 802.11b/g settings For Enable Radios, select the 802.11b check box Enable the radio
Top Page Image Contents