Panasonic PT-D5500UL manual Mail setup

E-mail setup page

With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be sent to one or more preset e-mail addresses (maximum two addresses). Click [Projector Control], then [E-mail set up] to display the E-mail setup page.

Button to update settings

E-mail Enable/Disable toggling SMTP server field

								Sender field
								Memo field
								(alphanumeric characters)
	Minimum sending	interval field		Set temperature selection
	(applies only to temperature warnings)
	ON/OFF toggling for permission		Destination e-mail address field
	to send e-mail when error occurs
					Change lamp usage
					time set value
									ON/OFF toggling for permission to
									send e-mail based on air intake
									sensor temperature
ON/OFF toggling for permission to					Periodic warning interval setting
send e-mail based on lamp usage time						(e-mail is sent on the checked days of the week/times)
							The settings for e-mail address 1 are the same.

49