Using Web Browser Control
This projector has networking functions which allow it to be controlled through a web browser on a PC. The controlled items are:
•Projector’s settings and adjustment
•Projector’s status display
•Transmission of a
Access procedure
Start the web browser on your PC, then
enter the IP address which was set in the projector.
Enter “user1” in the user name field, then enter the password in the password field.
The default setting is “panasonic” (all lower case). If you have changed the password, enter the new password here.
The host name set in the projector is displayed in the “Realm” field.
Click [OK].
The Basic Control page is displayed.
Note • Do not enter settings or perform controls with multiple web browser windows open at the same time.
Basic control page
This page is the first page displayed when the projector is accessed through a web browser. To move from another page, click [Projector Control], then [Basic control].
Power ON/OFF control Shutter control
Input channel switching
System type switching
46
