RS232C
This sets the communication parameters at the serial terminals.
For details on the serial terminals, refer to “Using the serial terminals” (page 38).
IN BAUDRATE | : 9 600, 19 200 or 38 400 is |
| selected. |
IN PARITY | : NONE, EVEN or ODD is |
| selected. |
OUT BAUDRATE: 9 600, 19 200 or 38 400 is
| selected. |
OUT PARITY | : NONE, EVEN or ODD is |
| selected. |
VPS SYSTEM | : MASTER or SLAVE is |
| selected. |
GROUP | : A to Z is selected. MASTER |
| or SLAVE is also selected. |
SYSTEM INFORMATION
The projector’s system information can be viewed.
SYSTEM INFORMATION
ROM VERSION | 1. 00. 00 |
SET RUNTIME | 300h |
LAMP1 LOW | 100h |
HIGH | 200h |
TOTAL | 300h |
LAMP2 LOW | 100h |
HIGH | 200h |
TOTAL | 300h |
LAMP1 ON | 20 |
LAMP2 ON | 20 |
LAMP1 TYPE | LAD55 |
LAMP1 TYPE | LAD55 |
RETRN
FAN CONTROL1
The fan can be controlled in accordance with the operating conditions.
NORMAL : Standard setting
HIGHLAND : This is selected when using the projector at an altitude of over 1 400 meters.
FAN CONTROL2
The fan can be controlled in accordance with the direction in which the images are to be projected.
HORIZ. : Standard setting
VERTICAL : This is selected when projecting images at a significant angle toward the vertical (more than 30 degrees from the horizontal).
V
H | 30 ° | 30 ° | H |
| 30 ° | 30 ° |
|
V
H: HORIZ.
V: VERTICAL
Attention • Select the correct FAN CONTROL2 setting in accordance with the direction
in which the images are to be projected. Using the projector at the wrong FAN CONTROL2 setting will shorten the service life of the lamps.
FUNC 1
The user can set the function for the remote control’s FUNC1 button.
LAMP POW : The button functions in the same way as “LAMP POWER” of “OPTION2”.
ASPECT : The button functions in the same way as “ASPECT” of “POSITION”.
AUTO POW.OFF
The projector can be automatically set to the standby mode if no signals are input for the set duration.
DISABLE : Standard setting. This function
is set to OFF.
Note • The auto power OFF function does not work while the freeze function is used.
PASSWORD
This function is used when a service person. Input the password with the numeric buttons (0 to
9)of the remote control and press ENTER button to confirm the entry.
35
