How to use ADVANCED MENU
ADVANCED MENU
INPUT RESOLUTION
CLAMP POS. |
| 1 | ||||||||
RASTER POSITION |
|
|
|
| ||||||
SXGA MODE |
| SXGA | ||||||||
SELSCT |
|
|
|
|
|
| ENTER |
|
| RETRN |
|
|
|
|
|
|
|
| |||
|
|
|
|
| ||||||
INPUT RESOLUTION
Input resolution adjustment achieves the best image when the screen flickers or halo is observed around the contour.
: These select the items listed below.
: These select the value.
“TOTAL DOTS”, “DISPLAY DOTS”, “TOTAL LINES” and “DISPLAY LINES”
Each item automatically displays a value in response to the type of the input signal. If vertical stripes appear on the screen or the image is partly missing, increase or decrease the displayed value while observing the screen to achieve the optimal value.
Note • The abovementioned vertical stripes will not appear on the screen when all signals are input.
RASTER POSITION
When the whole area where the input picture can be displayed is not used, the picture can be moved to any position inside the display area.
: These adjust the value in the horizontal direction.
: These adjust the value in the vertical direction.
SXGA MODE
This mode takes effect only when SXGA (RGB) signals are input.
SXGA : Standard setting
SXGA+: Select this when the screen is cut off.
Changing the display language
•The picture may be distorted during the adjusting operation, but this is not a fault.
•The input resolution can be adjusted only when RGB signal input is applied with RGB1 and RGB2 IN.
CLAMP POS. (For RGB signals only)
Use the clamp position adjustment to achieve the optimal value when dark areas of the image are crushed or displayed in green.
LANGUAGEENGLISH
SELECT |
| ENTER |
|
|
| RETRN |
|
|
|
Currently chosen language is displayed here.
Adjust with the 
buttons.
The value changes from 1 to 255.
The optimal value for the clamp position adjustment
•If dark areas are crushed:
The optimal value is the point where the dark area is best improved.
•If the dark areas are displayed in green:
The optimal value is the point where the green area becomes dark and clear.
Note • The clamp position can be adjusted only when the RGB signal input is applied with RGB1 and RGB2 IN.
Menus, setting items, adjustment screens, and control button names will be displayed in the language the user chooses.
The available languages are:
ENGLISH, DEUTSCH, FRANÇAIS, ESPAÑOL,
ITALIANO, 
, 
, 
, 
.
Note • The projector’s
32
