Installation and Configuration
The following cables are shipped with your autoloader:
■
■
■
SCSI Cable and Terminator Requirements
If the autoloader is the last device on the SCSI bus you must attach a terminator to the SCSI connector on the back panel of the autoloader. There must be a terminator on each end of the SCSI bus. Typically, the host adapter provides the
SCSI Cable Length
LVD SCSI configurations have a maximum allowable bus length of 39.4 feet
(12 meters). To determine the cable length of the bus, measure the lengths of the SCSI cables connecting each device to that bus and add those lengths together for the total length. To that total length, add 16 inches (40.64 cm) for the internal SCSI cable length used in the autoloader.
Accessories
The following accessories are shipped with each autoloader:
■Installation poster
■SCSI cable(s)
■
■SCSI terminator
■Hardware brackets and handles to rackmount the autoloader
■Standalone configuration hardware
■Two magazines
■1 data cartridge
■Power cord
■Rackmount template
24 | SSL1016 Tape Autoloader Reference Guide |