Autoloader Operation
A list of messages similar to the following screen appears.
Magazines: L ❋ R ❋
Loader: ONLINE
Drive: ONLINE
Mode: Mixed
Barcode Reader: ❋
Figure 64: Autoloader status message
Table 8: Autoloader Status Messages
Magazine |
|
|
|
L=❋ | The left magazine is present. |
|
|
R=❋ | The right magazine is present. |
|
|
L= (no ❋) | The left magazine is not present. |
|
|
R= (no ❋) | The right magazine is not present. |
|
|
Loader |
|
|
|
ONLINE | The autoloader SCSI connection is active. |
|
|
OFFLINE | The autoloader SCSI connection is not active. |
|
|
Drive |
|
|
|
ONLINE | The drive SCSI connection is active. |
|
|
OFFLINE | The drive SCSI connection is not active. |
|
|
Mode |
|
|
|
Random | Default. The autoloader is operating in Random mode. |
|
|
Mixed | The autoloader is operating in Mixed mode. |
|
|
Sequential | The autoloader is operating in Sequential mode. |
|
|
Seq Cycle Mode | The autoloader is operating in Seq Cycle Mode. |
|
|
NOTE: ISVs support different modes of operation. Be sure your autoloader is set to the correct mode of operation. The autoloader defaults to Random mode. See “Control Mode” in Chapter 2 for additional information.
Barcode Reader |
|
|
|
❋ | A barcode reader is present. |
|
|
No ❋ | A barcode reader is not present. |
|
|
90 | SSL1016 Tape Autoloader Reference Guide |