Autoloader Operation
Installing a Magazine
To install a magazine:
Note: Be sure you are using the proper magazine for your autoloader. DLT/SDLT magazines are not compatible with the SSL1016 Ultrium 460 Autoloader. Ultrium magazines are not compatible with the SSL1016 DLT1 Autoloader or the SSL10106 SDLT 320 Autoloader.
1.Grasp the magazine by the handle with one hand and support it underneath with the other hand.
2.Slide the magazine into the magazine bay. Make sure you position the magazine correctly; it should slide smoothly.
Caution: Be sure that you install only a
Figure 55: Installing a magazine
3.The magazine is correctly installed when you feel it click into place and the front is flush with the front panel. Left Mag Inserted or Right Mag Inserted appears on the LCD.
SSL1016 Tape Autoloader Reference Guide | 83 |