Installation and Configuration
3.On the Configuration submenu, scroll to Ethernet. (See Figure 26.)
4.Press Enter.
5.On the Ethernet submenu, scroll to Set Subnet Mask. (See Figure 27.)
6.Press Enter.
7.At each position of the mask address, scroll to the correct number and press Enter to advance your cursor.
Subnet Mask:
255.255.195.000
Figure 29: Setting the Subnet Mask
Note: Use the Escape key to backspace to a previous text box, if necessary.
When you have set the mask, the autoloader displays Enter to save.
8.Press Enter.
SUB addr changed to appears on the LCD. You do not need to reboot the autoloader.
9.Press Escape or Enter to return to the Ethernet submenu.
IP Gateway
An IP gateway is a device that converts data into the IP protocol.
To set an IP gateway:
1.On the main menu, scroll to Configuration. (See Figure 25.)
2.Press Enter.
3.On the Configuration submenu, scroll to Ethernet. (See Figure 26.)
4.Press Enter.
5.On the Ethernet submenu, scroll to Set Gateway. (See Figure 27.)
6.Press Enter.
50 | SSL1016 Tape Autoloader Reference Guide |