HP SSL1016 manual Using the Write-Protect Switch, DLT IV Cartridges

Tape Cartridge Usage

Using the Write-Protect Switch

All tape cartridges have a write-protect switch to prevent accidental erasure of data. When you enable write-protection, existing data on the tape cannot be overwritten, nor can additional data be appended to the tape. When you disable write-protection, existing data on the tape can be overwritten, and additional data can be appended.

Note: Before loading a cartridge into your autoloader, make sure that you set the write-protect switch to the desired position.

DLT IV Cartridges

1

2

Figure 49: Write-protect switch, DLT IV

1Write-protected (An orange indicator appears above the switch)

2 Write-enabled

SSL1016 Tape Autoloader Reference Guide 69