HP 5000 s2 Sheet-feed manual Enww

3

1

2

a.Arrange documents face down with the largest document on the bottom of the stack (1).

b.Place the next largest document face down on the largest document, top-justified and centered horizontally.

Repeat this step for each document in the stack.

c.When the stack is top-justified and centered horizontally, rotate the stack 180 degrees (2), and place the stack in the document input tray (3).

TIP: Avoid feeding a document with a leading edge that has been folded or frayed. When you begin scanning, select a profile whose page loading selection matches the edge you are feeding first to ensure that the scan reflects the orientation of the original document.

6.Verify that the paper guides are aligned with the edges of the stack.

ENWW Load originals 13