3.Fan the stack of document pages to ensure that the pages do not stick together. Fan the edge that will be pointing into the feeder in one direction, and then fan that same edge in the opposite direction.
4.Align the edges of the documents by resting the side of the stack against a flat surface (such as a table top), then gently tapping the upper edge until the pages are aligned. Never tap the stack against the table top. Rotate the stack 90 degrees so that the top edge of the document is resting on the table top and repeat.
5.Gently set the stack in the document input tray. Load the pages face down with the top of the pages pointing into the document feeder.
For best results, grip the stack on the left and right edges as shown, do not drop the stack into the document input tray, and do not tap the top edge of the stack after you have placed it in the document input tray.
If the stack has
12 Chapter 2 Use the scanner | ENWW |