HP Performance Optimized Data Center (POD) 40cp manual Replacing the fan

Page 39

4.Remove the three screws that secure the fan in the assembly (1), and then partially remove the fan by pulling it straight out (2).

5.Disconnect the wire.

6.Remove the fan from the assembly.

Replacing the fan

1.Connect the wire.

2.Insert the fan into the assembly and push until the fan is fully seated (1).

3.Secure the fan with three screws (2).

4.Connect the power supplies to the fan power assembly.

5.Return the fan bank to the AUTO mode of operation.

Removal and replacement procedures 39

Image 39
Contents Abstract Page Contents Periodic maintenance Contacting HP Illustrated parts catalog Structural component identificationParts and part number identification Life safety component identification Component Description Electrical power component identificationExternal panel labels Front view shown Callout Electrical safety label Description Control cabinet component identification Electrical safety label DescriptionHP POD 40c NA racks Cooling system component identificationCold aisle clearance Aisle clearancesHot aisle clearance Replaceable componentsRemoval and replacement procedures Safety considerationsOperator safety Fire detection and suppression Air filterRemoving the air filter Replacing the air filter Removing the busway drop box Busway drop boxReplacing the busway drop box Differential pressure sensor Replacing the differential pressure sensor Removing the differential pressure sensorDoor position contact Removing the door position contactReplacing the door position contact Removing the drain pan sensor Drain pan sensorReplacing the drain pan sensor Removal and replacement procedures Removing the ECS touchscreen ECS touchscreenReplacing the ECS touchscreen EPO buttonRemoving the EPO button Replacing the EPO button Removing the EPO LED indicator EPO LED indicatorsReplacing the EPO LED indicator EPO thermister Removing the EPO thermisterReplacing the EPO thermister Removing the external chilled water flow actuator External chilled water flow actuatorRemoval and replacement procedures Replacing the external chilled water flow actuator External chilled water flow valveExternal pressure gauge isolation valve Removing the external chilled water flow valveReplacing the external chilled water flow valve Fan Removing the external pressure gauge isolation valveReplacing the external pressure gauge isolation valve Removing the fan Replacing the fan Removing the fan bank Fan bankReplacing the fan bank Removing the fire strobe light Fire strobe lightReplacing the fire strobe light HumidifierRemoving the humidifier Removal and replacement procedures Replacing the humidifier Removing the humidistat HumidistatReplacing the humidistat Removal and replacement procedures Removing the humidity sensor Humidity sensorRemoval and replacement procedures Replacing the humidity sensor Removing the LED light LED lightReplacing the LED light Temperature sensor cold aisleRemoving the cold aisle temperature sensor Replacing the cold aisle temperature sensor Removing the hot aisle temperature sensor Temperature sensor hot aisleRemoval and replacement procedures Replacing the hot aisle temperature sensor Removing the Vesda filter Vesda filterReplacing the Vesda filter Qualified personnel Periodic maintenancePeriodic maintenance overview Cooling system maintenance scheduleLeak detection maintenance ECS Humidifier if installedPOD Shut Down Required ElectricalVesda Fire alarm and suppression systemHP POD 40c NA structure Life safetyThird-party components Access controlPeriodic maintenance Specifications General specificationsElectrical specifications Thermal and air flow performance Water specificationsRack specifications Environmental specificationsOptional features specifications Contacting HP Before you contact HPHP contact information Safety and regulatory compliance Warranty informationRegulatory information AHJ GlossaryPDU Documentation feedback Index Temperature sensor
Related manuals
Manual 63 pages 13.75 Kb Manual 21 pages 18 Kb