HP TippingPoint Next Generation Firewall HP TippingPoint S1000 Series, S1050F Appliance Overview

2 HP TippingPoint S1000 Series

This information describes the components, chassis, requirements, and installation specifics of the HP TippingPoint S1000 Series Next Generation Firewall Appliances. This series currently features the S1050F model, described further in the following topics:

•”S1050F Appliance Overview” on page 5

•”Model Requirements” on page 7

•”Technical Specifications” on page 8

•”Installing the Appliance” on page 8

For more information about installing the S1050F appliance, see ”Installing the NGFW Appliance” on page 21. Prior to installation, have the CLI Reference available for configuration information. After installing the components, complete the HP TippingPoint Setup Wizard as part of the installation and configuration procedures.

S1050F Appliance Overview

The S1050F appliance is a small form-factor devices designed for smaller network environments in which traffic throughput requirements are 500Mbps or less. This model provides the same high-level security protection as the higher-capacity models.

Chassis Front Panel

The S1050F appliance is a 1U form-factor device that is rack-mountable in a 19-inch rack (or 23-inch rack, with appropriate conversion parts available from rack accessory vendors).

The following image is a front panel view of an S1050F appliance:

Figure 2-1 S1050F Appliance Front Panel

1CFast card

21GB copper ports

3Dedicated HA port

4Serial console port/Management port

5Alert indicator

6Power indicator

7System status indicator

Next Generation Firewall Hardware Specification and Installation Guide 5