4.Using the NGFW LSM or the command line interface, configure your firewall rules according to your traffic flow requirements.
For more information about HP TippingPoint NGFW Appliance network configuration and connections, refer to the Local Security Manager User Guide and the CLI Reference.
Check LEDs
When you connect power to the appliance, the system completes a series of component checks. It then displays LEDs to show the status of each component. Refer to the information for your appliance model for more information about the LEDs.
Setup Wizard
After you have powered on, the NGFW setup wizard is displayed on your COM port terminal. The wizard prompts you to perform basic configuration tasks and periodically input information. After you run the setup, you can further configure your system using subsequent setup commands through the Command Line Interface (CLI). See the CLI Reference for detailed command descriptions.
Next Generation Firewall Hardware Specification and Installation Guide 27