HP TippingPoint Next Generation Firewall manual Technical Specifications, Installing the Appliance

WARNING! Do not attempt to install a DC power supply into an NGFW Appliance. The NGFW Appliance does not contain the grounding capability for safe installation of a DC power supply. Bodily harm and damage to the system could result.

Cabling Requirements

The S1050F appliance ships with the following cables:

•One AC power cable

•Null modem cable for the serial console management port (DB-9 to RJ-45) shown in Figure 2-3on page 7.

Technical Specifications

The S1050F appliance has the following specifications:

Table 2-2 S1050F Appliance Hardware Specifications

Specification	Description
Dimensions	1.73 in (H) x 16.78 in (W) x 17.72 in (D)
(unpackaged)	(4.40 cm x 42.62 cm x 45.00 cm)
Weight	15.28 lbs (6.93 kg)
Power	AC: Voltage 100 – 240; Current 4 – 2 A; Frequency 50 – 60 Hz
Requirements	The appliance’s maximum power consumption is 142 W.
Service Provider	Temperature: 32 – 104° F (0 – 40° C) — Operating
operating	Temperature: -4 – 158° F (-20 – 80° C) — Storage
requirements
	Altitude: No degradation up to 10,000 feet (3048 m)
	Humidity: 5% to 95% (non-condensing)
External interfaces	• 1 – 1GbE copper management port
	• 1 – RJ-45 console port
	• 8 – 1GbE copper ports
	• 1 external storage card drive

Installing the Appliance

To install and complete installation setup of the appliance, see ”Installing the NGFW Appliance” on page 21.

8 HP TippingPoint S1000 Series