HP TippingPoint Next Generation Firewall manual Model Requirements

The management port LEDs indicate link and activity state, as described in the following table. Table 4-1 Management Port LED Descriptions

LED Type	Color	Description
Link	Green	Link is active at 1000Mbps.
	Off	Link is inactive, or is active at 10Mbps or 100Mbps.
Activity	Blinking amber	Data traffic is passing.
	Off	No traffic is passing.

Eight 1GbE SFP fiber ports and four 10GbE SFP+ ports are also available on the S8000 Series appliances.

Model Requirements

The following topics describe the power and cabling requirements for the S8000 Series appliances.

•”Power Requirements” on page 18

•”Cabling Requirements” on page 18

Power Requirements

The S8000 Series appliances require one input of Alternating Current (AC) that must meet the following requirements:

• AC: Voltage 100V – 240V; 12 – 6 amp; 47 – 63 Hz

WARNING! Do not attempt to install a DC power supply into an NGFW Appliance. The NGFW Appliance does not contain the grounding capability for safe installation of a DC power supply. Bodily harm and damage to the system could result.

Cabling Requirements

The S8000 Series appliances ship with the following cables:

•Two AC power cables, one for each hot-pluggable power supply

•Null modem cable for the serial console management port (DB-9 to RJ-45)

18 HP TippingPoint S8000 Series