HP TippingPoint Next Generation Firewall manual Model Requirements

Model Requirements

The following topics describe the power and cabling requirements for the S3000 Series appliances.

•”Power Requirements” on page 12

•”Cabling Requirements” on page 12

Power Requirements

The S3000 Series appliances require one input of Alternating Current (AC) that must meet the following requirements:

• AC: Voltage 100V – 240V; 12 – 6 amp; 47 – 63 Hz

WARNING! Do not attempt to install a DC power supply into an NGFW Appliance. The NGFW Appliance does not contain the grounding capability for safe installation of a DC power supply. Bodily harm and damage to the system could result.

Cabling Requirements

The S3000 Series appliances ship with the following cables:

•Two AC power cables, one for each hot-pluggable power supply

•Null modem cable for the serial console management port (DB-9 to RJ-45) shown in Figure 3-3on page 11.

Technical Specifications

The S3000 Series appliances have the following hardware specifications:

Table 3-2 S3000 Series Appliance Hardware Specifications

Specification	Description
Dimensions	2U – 3.46 in (H) x 16.77 in (W) x 18.70 in (D)
(unpackaged)	(8.80 cm x 42.60 cm x 47.50 cm)
Weight	22.66 lbs (10.28 kg)
Power	AC: Voltage 100 – 240; Current 12 – 6 A; Frequency 47 – 63 Hz
Requirements	The appliance’s maximum power consumption is 493 W.
Service Provider	Temperature: 32 – 104° F (0 – 40° C) — Operating
operating	Temperature: -4 – 158° F (-20 – 80° C) — Storage
requirements
	Altitude: No degradation up to 10,000 feet (3048 m)

12 HP TippingPoint S3000 Series