mid-mount.
Figure 5-2 S1000 Series Chassis with Front Mounting in a Two-Post Rack
Figure 5-3 S1000 Series Chassis with Mid-Mounting in a Two-Post Rack
Four-Post Rack Mount for 1U Chassis
1.After attaching the front rack-mounting brackets to the appliance as described in ”Two-Post Rack Mount for 1U Chassis”, attach the two slide-bracket screws (provided in the kit) on each side of the chassis.
2.Using three rack screws (not included in the kit) on each side, attach either the short slide-bracket or the long slide-bracket to the rear post of the rack, depending on which length is needed to secure the chassis in the rack.
3.Slide the slide brackets mounted to the back posts of the rack onto the chassis.
4.Secure the front rack-mounting brackets into the holes of the front rack post with three rack screws (not included) on each side. Figure 5-4shows the appliance as it would appear in the rack with front and
Next Generation Firewall Hardware Specification and Installation Guide 23
