•Flashing Yellow — Hardware problem detected. Software running normally.
•Off — Appliance power is off.
Fans and Power Supplies
The S3000 Series appliances include two power supplies and three cooling fans. These components are
External Storage Card
The S3000 Series appliances include a CFast card slot. The external storage card stores system logs, snapshots, and other system data. The card can be removed and inserted while the appliance is running; however, to do so, you must issue the appropriate unmounting, mounting, and preparation commands in the command line interface (CLI). Refer to ”Using the External CFast Storage Card” on page 37 or the CLI Reference for command syntax.
For more information about configuring the external CFast card, refer to ”Using the External CFast Storage Card” on page 37.
Ports
All NGFW Appliances, including the S3000 Series appliances, are equipped with eight copper ports in addition to the console and management ports shown in the following figure:
Figure 3-3 Management and Console Ports
11
21GbE copper management port
3Link LED
4Activity LED
The management port LEDs indicate link and activity state, as described in the following table. Table
LED Type | Color | Description |
|
|
|
Link | Green | Link is active at 1000Mbps. |
|
|
|
| Off | Link is inactive, or is active at 10Mbps or 100Mbps. |
|
|
|
Activity | Blinking amber | Data traffic is passing. |
|
|
|
| Off | No traffic is passing. |
|
|
|
Eight 1Gbe SFP fiber ports are also available on the S3000 Series appliances.
Next Generation Firewall Hardware Specification and Installation Guide 11