HP TippingPoint Next Generation Firewall manual Power Supply and Fan Modules

B Power Supply and Fan Modules

This appendix provides installation instructions for power supply modules and fans. The following subjects are discussed.

•”The S3000 or S8000 Series AC Power Supply” on page 33

•”NGFW Fans” on page 34

WARNING! This product might have more than one power supply source. All power sources must be removed to de-energize the unit.

NOTE: The S3000/S8000 Series appliances have hot-swappable fans and power supplies. They have no other serviceable parts inside. There are no serviceable parts inside the S1050F appliance.

The S3000 or S8000 Series AC Power Supply

The S3000 and S8000 Series appliances include two power supply modules. The modules are hot-pluggable, redundant, and current-sharing, and the appliance can run with one active module.

Figure B-1 S3000/S8000 Series AC Power Supply

1Removal Latch

2Handle

3Status LED

4AC male power input

The Status LED is green when the module is powered and running normally.

Next Generation Firewall Hardware Specification and Installation Guide 33