HP TippingPoint Next Generation Firewall manual Pluggable Transceivers

Table A-2 RJ-45 Ethernet Connector Pinouts

Pin Number	Signal Name
7	Ground (GND)
8	Ground (GND)

NOTE: These ports can auto-negotiate their mode and can automatically detect whether they should operate in straight-through or cross-over mode.

Use the following pinout information when your RJ-45 device is operating in 1000Mbps (1GbE) mode.

Table A-3 RJ-45 Connector Pinouts for 1GbE Mode

Pin Number	Signal Name
1	Twisted Pair 1 positive (TP1+)
2	Twisted Pair 1 negative (TP1-)
3	Twisted Pair 2 positive (TP2+)
4	Twisted Pair 3 positive (TP3+)
5	Twisted Pair 3 negative (TP3-)
6	Twisted Pair 2 negative (TP2-)
7	Twisted Pair 4 positive (TP4+)
8	Twisted Pair 4 negative (TP4-)

Pluggable Transceivers

The NGFW S3000 Series and S8000 Series Appliances can also have pluggable transceivers. The following SFP transceivers are supported on both S3000 Series and S8000 Series models. The following SFP+ transceivers (with HP names) are supported on S8000 Series models:

•HP X126 1G SFP RJ45 T (Copper SFP)

•HP X126 1G SFP LC LX 10km 1310nm XCVR

•HP X126 1G SFP LC SX 550m 850nm XCVR

•HP S136 10G SFP+ LC SR

•HP S136 10G SFP+ LC LR

NOTE: Only optical transceiver modules (including SFP and SFP+) available from HP TippingPoint have been validated to achieve optimal performance with HP TippingPoint products. Other vendor devices are not supported. Using other vendor devices could be detrimental to proper operation of the HP TippingPoint system.

The following table details the information for SFP and SFP+ transceivers.

Fiber Input

Left side

Right side

Signal

Transmit

Receive

30 Connector and Cable Pinout Specifications