HP TippingPoint Next Generation Firewall manual CFast Card Commands, User-disk format

CFast Card Commands

The following table lists the commands used to manage the external storage card in the CLI. Refer to the CLI Reference for detailed documentation of these commands.

Table C-1 External Storage Card Commands

Command	Description
user-disk format		Formats a card. Any existing data on the card will be
		erased.
		NOTE: Only cards that are mounted and formatted
		manually by the user will be mounted automatically by
		the appliance when it boots. However, after the initial
		install, any card still present in the appliance during
		subsequent installs will also be mounted automatically.
user-disk mount		Manually mounts the inserted card.
		NOTE: Only cards that are mounted and formatted
		manually by the user will be mounted automatically by
		the appliance when it boots. However, after the initial
		install, any card still present in the appliance during
		subsequent installs will also be mounted automatically.
user-disk unmount		Unmounts the card so that the user can remove it.
user-disk encryption		Encrypts the card if the system master-key has been set.
enable		Changing the encryption status reformats the card and
		erases all data on the card.
		NOTE: Master-key and encryption controls can also be
		configured using System > Settings > Log Configuration
		in the NGFW LSM. For more information, refer to the
		Local Security Manager User Guide.
user-disk encryption		Disables encryption of the card if the system master-key
disable		has been set. Changing the encryption status reformats
		the card and erases all data on the card.
		NOTE: Master-key and encryption controls can also be
		configured using System > Settings > Log Configuration
		in the NGFW LSM. For more information, refer to the
		Local Security Manager User Guide.
cleanse		Wipes the CFast card clean.

38 Using the External CFast Storage Card