Fans and Power Supplies
The S1050F appliance includes one power supply and three cooling fans. These components are not
External Storage Card
The S1050F appliance includes a CFast card slot. The external storage card stores system logs, snapshots, and other system data. The card can be removed and inserted while the appliance is running; however, to do so, you must issue the appropriate unmounting, mounting, and preparation commands in the command line interface (CLI). Refer to ”Using the External CFast Storage Card” on page 37 or the CLI Reference for command syntax.
For more information about the procedure, refer to ”Using the External CFast Storage Card” on page 37.
Ports
All NGFW Appliances, including the S1050F appliance, are equipped with eight copper ports. In addition, appliances include the console and management ports shown in the following figure:
Figure 2-3 Management and Console Ports
11
21GbE copper management port
3Link LED
4Activity LED
The management port LEDs indicate link and activity state, as described in the following table. Table
LED Type | Color | Description |
|
|
|
Link | Green | Link is active at 1000Mbps. |
|
|
|
| Off | Link is inactive, or is active at 10Mbps or 100Mbps. |
|
|
|
Activity | Blinking amber | Data traffic is passing. |
|
|
|
| Off | No traffic is passing. |
|
|
|
Model Requirements
The following topics describe the power and cabling requirements for the S1050F appliance.
•”Power Requirements” on page 7
•”Cabling Requirements” on page 8
Power Requirements
The S1050F appliance requires one input of Alternating Current (AC) that must meet the following requirements:
• AC: Voltage 100V – 240V; 4 – 2 amp; 50 – 60 Hz
Next Generation Firewall Hardware Specification and Installation Guide | 7 |