HP 510x Print Server Using the Embedded Web Server, Using Telnet to Erase the Existing IP Address

Using Telnet to Erase the Existing IP Address

To erase the IP address during a Telnet session:

1.Type cold-reset, then press Enter.

2.Type quit, then press Enter to exit Telnet.

Note	This procedure resets all TCP/IP parameters, but
	only affects the TCP/IP subsystem. After this has
	been done the print server should be power cycled.
	Parameters for other subsystems such as IPX/SPX
	(Novell NetWare) or AppleTalk are not affected.

Using the Embedded Web Server

You can set IP parameters on HP Jetdirect print servers that support the embedded web server. For more information, refer to Appendix B.

ENWW TCP/IP Configuration 39