HP 510x Print Server manual General HP Jetdirect Messages 7

Table 7.2 General HP Jetdirect Messages (7 of 10)

Message	Description
NOT CONFIGURED	The HP Jetdirect print server has not been configured for
	NetWare. Use the printer installation software to configure
	the print server for NetWare networks.
NOVRAM ERROR	The HP Jetdirect print server cannot read the contents of
	its NOVRAM.
OUT OF BUFFERS	The HP Jetdirect print server was unable to allocate a
	buffer from its internal memory. This indicates all buffers
	are busy due possibly to heavy broadcast traffic or large
	amounts of network traffic directed to the print server.
OVERFLOW ERROR	Run the power-on self-test: turn the print server off, then
	on again.
PASSWORD ERROR	The HP Jetdirect print server detected that the password
	for the NetWare print server object is wrong. Use the
	PCONSOLE utility to erase the password for the print
	server object. When the HP Jetdirect print server logs on
	again, it sets a new password.
	Note: When multiple file servers are configured, the error
	is only displayed on the configuration page if none of the
	file servers are connected.
POSTSCRIPT MODE	The printer does not support the EtherTalk extensions. It
NOT SELECTED	may be a printer which does not support AppleTalk. When
or POSTSCRIPT	this message is displayed, the other AppleTalk messages
UPDATE NEEDED	(ADDRESS, APPLETALK NAME, ZONE NAME) are not
	displayed.
PRINT SERVER NOT	The file server does not have a print server object that
DEFINED	corresponds to the specified NetWare node name. Use
	printer installation software or PCONSOLE to create the
	print server object.
	When the HP Jetdirect print server is configured for
	multiple file servers, the error is only displayed on the
	configuration page if none of the file servers made the
	connection.
PRINTER NUMBER IN	The printer number assigned to the printer is already in
USE	use by another printer. Assign an unused printer number.
	This may also occur when a printer is power cycled, in
	which case the error goes away after the print server times
	out and detects the lost connection.
PRINTER NUMBER NOT	The printer number you assigned to the remote printer has
DEFINED	not been defined. Assign a valid printer number to the
	HP Jetdirect print server, or run PCONSOLE and define a
	printer number for the print server.

ENWW HP Jetdirect Configuration Page Messages 75