Table 7.6 | TCP/IP Configuration Messages (2 of 2) | |
|
|
|
Message |
| Description |
|
| |
DHCP SERVER | The IP address of the system that responds to the print | |
|
| server's DHCP request with configuration data. This |
|
| parameter is omitted when the print server is not |
|
| configured using DHCP. |
|
| |
CONFIG FILE: | The name of the HP Jetdirect configuration file. The file | |
|
| pathname may be truncated to fit on two lines. This |
|
| parameter is omitted when the print server is configured |
|
| from the printer's control panel. NOT SPECIFIED indicates |
|
| that a file was not specified in the BOOTP reply from the |
|
| host. |
|
|
|
Table 7.7 | Apple EtherTalk Configuration Messages (1 of 2) | |
|
|
|
Message |
| Description |
|
| |
APPLETALK STATUS: | Current AppleTalk status. | |
|
| DISABLED indicates that EtherTalk was manually |
|
| disabled. LocalTalk is always enabled. |
|
| READY indicates that the HP Jetdirect print server is |
|
| awaiting data. |
|
| INITIALIZING indicates that the print server is registering |
|
| the node address or name. |
|
| |
ETALK NET: XXXXX | NET: identifies the AppleTalk Network Number on which | |
NODE:XXX: X | the HP Jetdirect print server is currently operating. NODE: | |
|
| identifies the AppleTalk Node Number that the print server |
|
| chose for itself as part of its initialization sequence. PX |
|
| identifies the configured EtherTalk network protocol phase. |
|
| P1 is the earlier or original version of the EtherTalk |
|
| protocol. P2 is the current version of the EtherTalk protocol. |
|
| |
APPLETALK NAME: | The name of the printer on the AppleTalk network. A | |
|
| number after the name indicates that there are multiple |
|
| devices with this name, and this is the Nth instance of the |
|
| name. |
|
| |
APPLETALK TYPE | The type of the printer being advertised on the network. | |
|
| |
ETALK ZONE: | The name of the EtherTalk network zone on which the | |
|
| printer is located. |
|
|
|
ENWW | HP Jetdirect Configuration Page Messages 83 |