HP NetServer 5971-0821 manual Using Advanced Configuration Parameters, Updating Windows NT

Page 31

Updating Windows NT 4.0

1.Start Windows NT.

2.Click the Start button on the Windows NT task bar, and then point to Set- tings.

3.Click the Control Panel.

4.Double-click the SCSI Adapters icon.

5.Click the Drivers tab, and then click the Add button.

6.In the Install Driver window, click the Have Disk button.

7.Insert the HP Ultra3 Family Manager Set disk for Windows NT into drive A.

8.From the Copy Manufacturer’s File From text box, type a:\nt4, and click OK.

9.In the Install Driver window, Click OK.

10.Click the New button when asked if you want to use the currently installed driver(s) or install new one(s).

11.Type a:\nt4 again, and click Continue. The driver is now installed.

12.You must restart your computer for the changes to take effect. Click Yes to restart your computer. Click No to return to the SCSI Adapters window.

Using Advanced Configuration Parameters

Advanced users may use software parameters to alter the configuration of the Windows NT device drivers supplied by HP. All Windows NT configuration information is stored in a data structure called the Registry. You can edit this information through a tool called the Registry Editor.

CAUTION Do not edit your registry unless it is absolutely necessary. If there is an error in your registry, your computer may become nonfunctional.

25

Image 31
Contents HP Part Number Audience Assumptions Contents Novell NetWare Installation Microsoft Windows 2000 InstallationSCO UnixWare Installation SCO OpenServer InstallationLinux Support Product Specifications Troubleshooting 101 Regulatory Information 103 Warranty and Support 109Index 111 HP Ultra3 Single Channel Scsi Host Bus Adapter Installation and SetupPrimary and Secondary Bus Segments Bus Segments on the HP Ultra3 Scsi Host AdapterBit and 64-bit Expansion Slots Installing the HP Ultra3 Scsi Host Bus AdapterHost Bus Adapter Installed in 64-bit Slot Terminate the Ends Setting Up Scsi DevicesChoosing Scsi Cables Check the Scsi IDsPage Connecting the Scsi Host Adapter to the Common Tray Connecting Scsi DevicesCommon Tray Cable Connection Connecting the Scsi Host Adapter to a Hot-Plug CageHot-Plug Cage Cable Connections Connecting Ultra/Fast Wide Scsi DevicesConnecting Ultra/Fast Wide Scsi Devices Connecting Internal Ultra/Fast Narrow DevicesConnecting Ultra/Fast Narrow Devices Connecting External Scsi Devices10. Connecting External Scsi Devices Preloaded Ultra3 Drivers HP Ultra3 Scsi Host Adapter Driver SoftwareEmbedded Ultra3 Drivers Troubleshooting Boot Device Options Configuration with SCSISelectScsi Device Configuration Advanced Configuration Options SCSISelect Options Available Default SettingsStarting SCSISelect Exiting SCSISelect Using SCSISelect SettingsScsi Bus Interface Definitions Scsi Device Configuration Boot Device OptionsAdvanced Configuration Options Page Page Using Scsi Disk Utilities Installing the Driver When Installing Windows NT Microsoft Windows NT InstallationAdaptec Ultra3 PCI Scsi Controller NT4.0 Completing a Fresh Windows NT 4.0 Installation From CD-ROM Installing the Driver When Windows NT is Already InstalledUpdating Windows NT Using Advanced Configuration ParametersRegdword Using Windows NT Scsi ParametersUsing Driver-specific Parameters Page Type a\nt4\hotp160m.reg and press Enter Hot-Plug PCI FeatureRemoving a Host Adapter Using Windows NT and the Host AdapterRemoving a Host Adapter in Windows NT Problems and SolutionsPress spacebar NOW to invoke the Last Known Good menu Error MessagesXxxxx021 Target device protocol error Adpu160m.sys Error MessagesXxxxx010 Error issuing command Xxxxx011 Error issuing commandXxxxx032 Target device busy Xxxxx023 Target device parity errorXxxxx024 Data overrun or underrun Xxxxx031 Target device queue fullXxxxx0ce Scatter/gather limit exceeded Xxxxxd4 Adapter hardware failure adapter resetXxxxx0d6 Internal driver error Xxxxx097 Unable to allocate memoryPage Installing the Driver When Installing Windows Microsoft Windows 2000 InstallationPress any key to boot from CD Click the Control Panel Using Windows 2000 Scsi Parameters Regdword Regsz Troubleshooting Problems and Solutions Driver Error Messages Xxxxx021 Target device protocol error Xxxxx089 Unable to allocate memory Xxxxxd4 Adapter hardware failure adapter reset Page NetWare 3.12/3.2 Novell NetWare InstallationInstalling the Driver When Installing NetWare Download the Nwpa Update PackageLswap loader.exe \server.312\server.exe cd \server.312 Copy cdrom.nlm to c\server.312\cdsaveLoad c\server.312\adpt160m slot=2 NetWare 4.12/4.2Select Save parameter and continue, and press Enter NetWareInstall CD-ROM Drivers on a DOS Bootable Hard Disk DOS Drivers for CD-ROM AccessMkdir c\scsi Copy a\dos\*.* c\scsi Load pathnameadpt160m options Installing the Driver When NetWare is Already InstalledLoad c\nwserver\adpt160m verbose=y Loading the Driver at Server BootupUsing the Load Command Line Options Load pathnameadpt160m.ham optionsOption Values Default Description Adpt160m.ham Command Line OptionsMultluntargets= Binary Hex Bit Mask OptionsLoad a\netware\adpt160m.ham Using NetWare and the Host AdapterSample Load Commands Using Removable MediaLock Status Mount StatusUsing a CD-ROM with NetWare Using the NetWare Tape BackupLoad pathnameadpt160m Cd mount x name Optimizing PerformanceScan all luns Cd device listXxxxx081 Adapter software initialization failure Xxxxx080 Unable to allocate memoryPage Xxxxx0a9 Possible interrupt conflict Xxxxx0a4 Scsi bus reset by third party hardwareXxxxx0c9 Invalid command line parameter Xxxxx0ac Driver already loaded for all host bus adaptersPage Installing the Driver When Installing SCO OpenServer SCO OpenServer InstallationInstalling SCO OpenServer When you see these prompts Umount /stand Name Description Logical Bus Adapter Device Unit Prefix Type Number HostEnter Using Multiple Host Adapters Using SCO OpenServer and the Host AdapterUsing Tunable Parameters for the ad160 Driver Setting ParametersChanging the Boot Disk Using Wide Scsi Host Adapters and DevicesEnabling Scatter/Gather and Tagged Queuing Changing the Maximum Number of LUNs SupportedMy computer does not recognize my host adapter My computer does not recognize my Scsi devicesAm having problems booting the computer from a Scsi drive Ad160 Sdsk My computer hangs during heavy system load activity My computer crashes or displays panic messages at boot timeType Y to rebuild the kernel environment Reboot the system Xxxxx0ca Cannot initialize device Page Installing the Driver When Installing UnixWare SCO UnixWare InstallationInstalling the Driver When UnixWare is Already Installed Load the Package Back Up the ComputerPkgadd -d diskette1 Cat /etc/conf/sdevice.d/adst21 Modify the New System FileRebuild the UnixWare Kernel Type pkginfo -l adstxx and press EnterCd /etc/conf/cf.d cp unix /stand/unix cd Shutdown -g0 Using UnixWare and the Host AdapterBoot the New Kernel Cd /etc/conf/bin Idbuild -BRemoving the Driver Using Tunable ParametersEtc/conf/bin/idbuild -B Cp /etc/conf/cf.d/unix /stand/unix Etc/conf/bin/idinstall -d adst70 Etc/conf/bin/idinstall -d adst21Troubleshooting Xxxxx011 Error issuing command Adapter was given more or less data than was expected Xxxxx046 Target device did not respond to abort sequence Xxxxx097 Unable to allocate memory Linux Operating System World Wide Web URL Linux SupportPage Electrical Product SpecificationsEnvironmental PhysicalRegulatory 100 Device connected, but not ready TroubleshootingTroubleshooting Checklist Common Error MessagesTime-out failure during … Start unit request failed102 Class B Equipment Regulatory InformationRegulatory Notices Electromagnetic Compliance Federal Communications CommissionClass a Equipment Class a Accessories104 For products labeled as Class a For products labeled as Class B105 106 Class a Warning 107 108 Declaration of Conformity US, EU, Australia109 Warranty and SupportHardware Accessories Limited Warranty Hewlett-Packard Hardware AccessoriesCanada HP Repair and Telephone SupportWorld Wide Web Third-Party Hardware Products111 Index112 113 114